5600 with new TIER IV engine

[Jabonee]

Curious too know how these new TIER IV engines are performing in the Toolcats. Anyone out there with one? Any issues?

 

[Xfaxman]

Yep, I would also like to know. Thinking about trading in my 5610 F series to get the Traction Control.

 

[Jabonee]

I guess thers not to many out there yet. Looks of people looking but no replies.

 

[DEWFPO]

Wish there was an easy way to enable traction control on my D series.

DEWFPO

 

[yellowdogsvc]

I think you can get it retro on the F series.

 

[Jabonee]

I believe its an option on the F series. D series should have axle matching if the software has not been updated.

 

[Xfaxman]

I ordered mine with the Limited Slip Transaxle, but didn't get it or it doesn't work. :thumbdown:

 

[Jabonee]

You should have the traction control on your unit xfaxman if your SN# starts with a "B". No such thing as limited slip. Do you have a on/off switch on the dash? You may have paid for something you didn't get !

 

[Xfaxman]

You should have the traction control on your unit xfaxman if your SN# starts with a "B". No such thing as limited slip. Do you have a on/off switch on the dash? You may have paid for something you didn't get !

Ours is a 2013 F series, SN# starts with a "A". Here is the Quote:

 

[Jabonee]

Thats just pluff to make it sound good. There is no mechanical means in that transaxle that limits the transfer of power to the R or L wheel. It turned out to be a big problem when the did away with axle matching. It was basically brought back as "TRACTION CONTROL"

 

[Bheal]

Our G series is just over a year old with just over 900 hours on it and we have had no problems with the engine at all.