593 Fuel filter replacement

   / 593 Fuel filter replacement #1  

likembikem

New member
Joined
Nov 23, 2013
Messages
13
Location
Hillsboro, Tn
Tractor
Massey Ferguson 593 Ford 5610
Going to replace fuel filter soon. It has a couple of times ran rough then died at start up. I drained fuel from the filter/ separator and it started and ran fine. Figure water in fuel. Before replacing I have looked for a hand/ primer pump and can't find one. The AGCO parts diagram shows filter and looks like where it mounts to is called a pump (?) Still not seeing a manual pump. I would like to know about this before I start this job. It is a 2006 593. Maybe it primes itself?
 
   / 593 Fuel filter replacement #2  
Just FILL THE FILTER before installing & once it starts, hold the rpm's to almost full speed until u hear the rpms stumbling & pick back up.. DONE..
thats just air making its way out of the system..
 
   / 593 Fuel filter replacement
  • Thread Starter
#3  
Thanks, that's good news. I'll be doing just that. Had some strong storms here last night and I got some clean up to do first. By Sunday I should be able to change the filter. Thanks again.
 

Tractor & Equipment Auctions

3-point Scratcher (A35780)
3-point Scratcher...
60" Forks (A36337)
60" Forks (A36337)
John Deere 4440 (A35780)
John Deere 4440...
KBH Tender Trailer (A35780)
KBH Tender Trailer...
2008 Thomas 18-Passenger Bus, (A35430)
2008 Thomas...
Land Honor LHR-GAC604 Air Compressor (A34127)
Land Honor...
 
Top