Grading 702C Front Blade on a TC30 ? Help with pics !

   / 702C Front Blade on a TC30 ? Help with pics ! #11  
So Jerry,

Does this mean that you won't be looking for a box to ship the blade my way /forums/images/graemlins/frown.gif /forums/images/graemlins/frown.gif

Looks nice, I am sure you will enjoy the blade.


murph /forums/images/graemlins/grin.gif
 
   / 702C Front Blade on a TC30 ? Help with pics !
  • Thread Starter
#12  
The 702C blade came in 3 widths, 60in, 78in, and 84in. Mine is the 78in, which is what New Holland recommends for the TC25, TC29, TC33, and TC30. The blade is at least 6 inches wider than the tractor when angled the full 30 degrees.

Steering can be compromised depending on how much 'down pressure' you apply to the blade. I can lift the front wheels a few inches off the ground if I want to really dig in. But, most of the time, I use the float setting, so there is little or no 'unweighting' of the front tires.
 
   / 702C Front Blade on a TC30 ? Help with pics !
  • Thread Starter
#13  
Sorry, no box. It looks like a keeper.

I think my next project is to paint the whole assembly come spring. The blade will get a nice glossy black and the rest will be New Holland blue. I'm also going to paint the trip springs blue. I painted the shock springs on my Yamaha Grizzly ATV. For some strange reason, I really like brightly colored springs.
 

Attachments

  • 823781-junk.jpg
    823781-junk.jpg
    55.8 KB · Views: 715
   / 702C Front Blade on a TC30 ? Help with pics ! #14  
Nice work Jerry

Just an FYI on the metric bolts - McMaster Carr is the ultimate hardware store. Shipping can be fast depending on where their closest distribution center is (I get stuff in MA from NJ in 1 day).
 
   / 702C Front Blade on a TC30 ? Help with pics ! #15  
Hazmat is right, I just received a box of 5mm screws the day after ordering from McMaster's. My first order they had one of their employees drive to our home the very same day that I placed the order. It doesn't get much better than that. /forums/images/graemlins/grin.gif
 
   / 702C Front Blade on a TC30 ? Help with pics !
  • Thread Starter
#17  
Hmmm /forums/images/graemlins/confused.gif The blade moves up/down and right/left. I think thats four ways ?
 

Tractor & Equipment Auctions

2015 JLG G12-55A 12,000lb 4x4 Rough Terrain Telehandler (A49461)
2015 JLG G12-55A...
2018 FREIGHTLINER CASCADIA TANDEM AXLE DAY CAB (A51222)
2018 FREIGHTLINER...
2018 HINO 258 SERVICE TRUCK (A51243)
2018 HINO 258...
SpotWeld RockerRite 480V Arm Type Spot Welder (A50322)
SpotWeld...
DOOSAN G25 GENERATOR (A50854)
DOOSAN G25...
PAIR OF TALL STACK PIPE RACKS (A50854)
PAIR OF TALL STACK...
 
Top