758C BH stabilizers

   / 758C BH stabilizers #1  

billfires

Gold Member
Joined
Apr 16, 2001
Messages
427
Location
Southeastern Mass
Tractor
New Holland 1920
Does anyone know if it's normal for the stabilizers to only be able to lift the tires less than an inch off the ground? It is mounted on a NH 1920 with turf tires. I know they are not at the limit of their travel because if I lift the back with the BH boom they will extend further. It sounds like a relief valve is opening up when they stop. Any info or suggestions appreciated. Thanks

Bill C
 
   / 758C BH stabilizers #2  
Bill:

Any backhoe I have seen in operation could lift the tractor well off the ground. Some operators even use them to do small side shifts.

Egon
 
   / 758C BH stabilizers #3  
New Holland has set the pressures on these tractors to just stabilize the tractor not lift it off the ground. if you read the operators manual on the hoe you will see NH say optimal digging is achieved with tractor stabilized and not lifted of the ground hope that helps.
 
   / 758C BH stabilizers
  • Thread Starter
#4  
Egon and spencer200 here is an update on the stabilizer problem. The rear tires are loaded with CaCl and are 700+ lbs. Also I weigh a little under 300lbs, so there is the weight of the BH 1000 lbs and another 1000. Yesterday I put the stabilizers down while I was off the tractor and they lifted to full extension. Thanks again for your help.

Bill C
 

Tractor & Equipment Auctions

Clark GCX25E Forklift (A47369)
Clark GCX25E...
2018 FRIGHTLINER 122SD (A47001)
2018 FRIGHTLINER...
2008 PARK MONORAIL (A47001)
2008 PARK MONORAIL...
2014 Ford F-150 Pickup Truck (A46684)
2014 Ford F-150...
2007 TROXELL KILL/TRANSPORT TRAILER (A47001)
2007 TROXELL...
New Wolverine Sickle Bar Mower 72'' (A48289)
New Wolverine...
 
Top