8N Sway Bars

[mrfu]

Here are some ideas from another forum
Swaybar clips
Another (cheaper) way to restrain sway-bars - Yesterday's Tractor Co.

 

[chriscos]

I use a bungee cord. I just route it up around the top link pin on the tractor. Works easy enough.

I like the clips though from the link in the post above.

 

[blount2000]

Thanks to everyone for the great tips and suggestions regarding my question!

 

[bootmaker]

It sounds like your hydraulics need to be looked at. I suspect your cam follower pin is worn as well as the cam. Rebuilding the hydraulics is easy with an 8N. The cam follower pin is actually # 73928-S18 Pin for the Draw Bar Control Arm: 5/16" dia. x 1"

You can get it here.

 

[DaveOmak]

Here is what I have done to remedy your problem... Dave