A backup camera for $50!!!!!!!!!!!

[countrybumpkin]

Done some blade work on the driveway today and really liked the cam. I could see the full width of the blade just looking at the screen where I would have to lean back a bit if I turned around to look.

 

[Complete Turf Care]

I have to say that I am still disappointed with my system. The screen is just too small for working. I have a 7" monitor. And, I'm in a cab, but the sunlight is still too much for me to see enough detail.

I've put about 40 hours on my tractor in the past week, about half of that with the tiller and the other half with my blade doing some laser leveling. I find myself looking at my mirrors a lot more than looking at my monitor. Oh well....

 

[PILOON]

I definitely need the camera on the loader. Picking up something at ground-level with the forks, or even attaching most quick-attach attachments, is a pain in the ***.

I also know some guys that install them simply to align themselves to hook up travel trailers. Reduces that chore to a simple one man operation.

 

[buckeyefarmer]

Have not installed mine yet.......

 

[94BULLITT]

I have to say that I am still disappointed with my system. The screen is just too small for working. I have a 7" monitor. And, I'm in a cab, but the sunlight is still too much for me to see enough detail.

I've put about 40 hours on my tractor in the past week, about half of that with the tiller and the other half with my blade doing some laser leveling. I find myself looking at my mirrors a lot more than looking at my monitor. Oh well....

There are 9'' monitors.

 

[Complete Turf Care]

Well....I raised the front end loader too high and pulled the wires out of the back of my front camera. I haven't had time too look at it to see if I can put the wires back in, or if I'll need to order another camera.

 

[countrybumpkin]

I used the front camera yesterday with the bucket to level a couple of spots in the yard where I removed two stumps and filled the holes last winter. Really worked nice to watch just how much I was scrapping off the top.

 

[Complete Turf Care]

Well....I raised the front end loader too high and pulled the wires out of the back of my front camera. I haven't had time too look at it to see if I can put the wires back in, or if I'll need to order another camera.

Today, the monitor went dead. I think it happened when I started using the third function for my grapple. I bet the fuse blew, and I haven't had time to check it.

 

[Complete Turf Care]

Well....I raised the front end loader too high and pulled the wires out of the back of my front camera. I haven't had time too look at it to see if I can put the wires back in, or if I'll need to order another camera.

Today, the monitor went dead. I think it happened when I started using the third function for my grapple. I bet the fuse blew, and I haven't had time to check it.

 

[Threepoint]

I used the front camera yesterday with the bucket to level a couple of spots in the yard where I removed two stumps and filled the holes last winter. Really worked nice to watch just how much I was scrapping off the top.

Thanks for the update, CB. Sounds like your setup is working well. I've had my second camera for awhile. 'll likely use your approach when I finally get a round tuit. In the meantime, procrastination is being rewarded as more reports come in.