Accessing Kubota with Front End Loader for Maintenance

   / Accessing Kubota with Front End Loader for Maintenance #21  
   / Accessing Kubota with Front End Loader for Maintenance #22  
After releasing the lever on the side panels pull out on the bottom of the panel and lift.
 
   / Accessing Kubota with Front End Loader for Maintenance #23  
Release side lever, pull bottom of cover out toward tire about 3 inches and then lift straight up. I have a 3710 and work on it with the loader in the down position. Make sure to lube the release lever while you have the covers off. The lever is easy to break off if they haven't been lubed for a long time. Replacing the oil filter is a pain and i normally remove the bottom cover (gray) panel left bolt. Gives just enough room to get the filter out without to much trouble.
 
   / Accessing Kubota with Front End Loader for Maintenance
  • Thread Starter
#24  
Thanks. I will yank harder on it and get it off.
 
 

Tractor & Equipment Auctions

2018 Nissan Pathfinder SUV (A50324)
2018 Nissan...
2020 CATERPILLAR 326 EXCAVATOR (A51242)
2020 CATERPILLAR...
2003 Big Tex 10PI 16ft. T/A Pipe Top Utility Trailer (A49461)
2003 Big Tex 10PI...
2004 Ford F-750 Crew Cab Wrecker Tow Truck (A48081)
2004 Ford F-750...
2016 Ram 4500 Wheeled Coach Ambulance (A48081)
2016 Ram 4500...
2015 Kia Sportage LX SUV (A50860)
2015 Kia Sportage...
 
Top