Add a rear remote to a Kubota L4310

thendrix · May 23, 2015

I need info on adding a rear remote hydraulic to a Kubota L4310 with a loader. Any info on parts, price, complexity, etc would be greatly appreciated.

J_J · May 23, 2015

Does your tractor have a loader and hyd block?

If so, then remove the PB hose on the hyd block and connect the PB line to the new valve, and then connect the PB from the remote valve back to the port on the hyd block.

The valves should now be n series for a complete flow path.

All tank lines go to tank.

Price will be determined by the valve you purchase as to the number of spools, etc.

If you only need a two spool valve, we can guide you to the right place.

The valve should have a PB port with a PB adapter.

Piston · May 24, 2015

If you already have a loader, then click on the link in my signature below. Your tractor should be EXACTLY the same.

thendrix · May 24, 2015

Thanks y'all. I'll have a closer look and report back

jgibbens · May 24, 2015

You could also add a power beyond remote to the rear of the tractor and mount a solenoid spool valve for more flexibility. I have that setup on my L-series and love it.

Leejohn · May 24, 2015

Check the dealer and see what the price is for OEM rear remotes. They are nice and a clean set, they pull the power from the back at the rock shaft control.

countrybumpkin · May 24, 2015

Leejohn said:
Check the dealer and see what the price is for OEM rear remotes. They are nice and a clean set, they pull the power from the back at the rock shaft control.

They are very pricey but nice clean set up.

thendrix · May 25, 2015

What do you mean by very pricey? What kind of numbers?

countrybumpkin · May 25, 2015

Last time I checked for my L3410 it was right at 1000 for the first one and 700 each for the 2nd and 3rd.

J_J · May 26, 2015

Just go to Surplus and purchase a 2 or 3 spool valve with the options you want for your new projects, like float, detent, maybe a motor spool , etc.

You will come out money ahead if you can turn a wrench.