Backhoe Adding a New Kubota Factory Backhoe to a 2-Year-Old B2920

[sandyc]

Just a note: There is a lockout that comes with the BH65 on the 2920 that prevents the tph from being engaged while the bh is connected. The lockout keeps the tph engagement lever from being put into the raised position. The manual cautions that moving the tph lever while connected to the bh can lead to serious problems. I trusted the manual and never tried!

 

[newbury]

Woods B70x is a better design than factory unit... You can leave three point hitch on, and mount it in two minutes. If you're still looking, check out eBay.... There were a few sellers moving inventory at a good discount, even with delivery a much better deal than factory unit. As far as resale, no real difference, unless you talk to a dealer who will try to beat you up on your trade. Definitely get a sub frame, and installation is a few hours of work.

My BH70-X does not fit with the 3pt arms on on my B7610. Tried, no success.

 

[sandyc]

Not sure my 2620 can have the three point attached with the backhoe on. Never tried and probably won't as I have no implements to use with it..

Sent from my iPhone using TractorByNet