adding a snow plow to front of a 3320

[sparker133]

I have a 3320 and i just pick up a snow plow. I don't want to hook it up to the fel because of the problems it can cause. I saw a couple of guy mount it the front and used the loader outputs to control it. My questions are what size cylinders do i need, and what is the psi. Where do i get the quick couplers to hook up to the fel couplers. Also, were is a good place to get my part at a good price.

 

[UnclePaul]

I don't know what the psi is but I do know you should be able to get the hydraulic fitting you need from tractor supply. The cylinder you are speaking of I assume are for power angling? If so it might be easier for you to use one double action cylinder rather than two regular cylinders. I know it sounds like it would not be as strong but it works fine. My friend had this setup on a 40hp Kubota and plowed with it for at least 6 years without any problems.

 

[kennyd]

Duplicate of this thread: 3320 john deere snow plow help - TractorByNet.com