Adding Guages To your Yanmar
- Thread starter pennwalk
- Start date
- Views: 61465
Inspector507
Super Member
Turns on the rear work light.
Sorry to re-hash the subject, but I'm very interested in adding a few guages to my 1401d. Has anyone out there added guages to a 1401? If so, are the adapters the same as those mentioned in these threads? I'd like to at least add water temp and oil pressure.... I'm not exactly a mechanic, but I'm willing to get my hands dirty and give it a try--just need a little guidance.
Thanks for any help!
tony w
Thanks for any help!
tony w
rdam
Gold Member
Tony,
I installed Sunpro oil pressure and water temp gauges on my YM 1500. It's pretty simple and I obtained all the info needed from posts, posting, or private messaging members.
Before you gather up all your "stuff", locate the oil pressure sending switch and the water temp sender. Remove them and then carefully re-install them. This way you'll know you can get them out and know what's involved before you start drilling holes and running tubes. /forums/images/graemlins/smirk.gif
Oh, yeah. Get the Sunpro copper tubing to replace the plastic tubing that comes with the oil pressure guage.
Rick
I installed Sunpro oil pressure and water temp gauges on my YM 1500. It's pretty simple and I obtained all the info needed from posts, posting, or private messaging members.
Before you gather up all your "stuff", locate the oil pressure sending switch and the water temp sender. Remove them and then carefully re-install them. This way you'll know you can get them out and know what's involved before you start drilling holes and running tubes. /forums/images/graemlins/smirk.gif
Oh, yeah. Get the Sunpro copper tubing to replace the plastic tubing that comes with the oil pressure guage.
Rick
Thanks, Rick! Would you be interested in having someone--like me for instance--ask for a little assistance through private messaging or e-mail?! /forums/images/graemlins/crazy.gif
Anyone out there have pictures of the water temp switch? I've locate the oil press. unit already. Also, I'm guessing Sunpro is everyone's choice for guages?
thanks
tony
Anyone out there have pictures of the water temp switch? I've locate the oil press. unit already. Also, I'm guessing Sunpro is everyone's choice for guages?
thanks
tony
JerryG
Super Member
Sunpro is a good brand as is Stewart-Warner and several others. Get a gauge that has the limits both min and max that you need, then get the diameter that will fit where you want to place it. You may or may no need a metric fitting kit. Some of the others will be able to tell you if you do on a Yanmar.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
I had to add/replace gauges on my 8n and NAA tractors.. I used all sunpro... cheap and they work.
They even have a metric conversion kit.. ( though my old girls were all sae... )
Soundguy
They even have a metric conversion kit.. ( though my old girls were all sae... )
Soundguy
Inspector507
Super Member
Tony,
I've done this upgrade. If you'd like to contact me, either message or e-mail is in my profile.
Jerry
I've done this upgrade. If you'd like to contact me, either message or e-mail is in my profile.
Jerry