Adding lights to a B3200

   / Adding lights to a B3200 #1  

bullet3z

Bronze Member
Joined
Mar 28, 2008
Messages
73
Location
Pa
I picked up a B3200 with FEL and I wanted to add 2 work lights to it. I am looking into the LED work lights that are available. So there will be no power issues with adding these lights. I will mount them on the ROP bar without drilling into it, if I can. My question is where to get the power supply from on these tractors? I will also be adding a lighted switch on the blank panel next to the drivers side arm rest.

I already changed the headlights out for LED bulbs. I will probably change the rest out as I go.
 
   / Adding lights to a B3200 #2  
There is a power tap on the right rear of the tractor. if I remeber right it is on the same wire that goes to the right flasher. It comes with a ground eye and a bullet conector for power. It has power to it when ever the key is on.
Rob
 

Tractor & Equipment Auctions

2019 BOBCAT T770 SKID STEER (A51242)
2019 BOBCAT T770...
2014 TOYOTA 8FGCU25 FORKLIFT (A51222)
2014 TOYOTA...
1981 Case 245 2wd tractor with Rotary cutter (A51039)
1981 Case 245 2wd...
2021 John Deere 5045E  Only 86 Hours, Loader Ready, 2WD, Canopy (A51039)
2021 John Deere...
2013 Ver-Mac Solar S/A Towable Trailer Message Board (A49461)
2013 Ver-Mac Solar...
24 Foot Wells Cargo Enclosed Trailer (A50324)
24 Foot Wells...
 
Top