Adding rear remote to my 1533

   / Adding rear remote to my 1533 #11  
Understood, that is why I put "assume".
 
   / Adding rear remote to my 1533 #12  
<font color="blue"> Understood, that is why I put "assume".
</font> I know, no problem. I checked out your pictures. You did get them up, quit a few. /forums/images/graemlins/cool.gif
 
   / Adding rear remote to my 1533
  • Thread Starter
#13  
My stick is mounted on the tractor, just like the one shown in the picture. John
 
   / Adding rear remote to my 1533 #14  
<font color="blue"> My stick is mounted on the tractor </font>
Then, you will almost have to put the remote on the right fender or mount a arm to the ROPS that extends forward over the fender. It is more work, but it makes a much cleaner install if it is on an arm. That is the way I see it anyway.
 
   / Adding rear remote to my 1533
  • Thread Starter
#15  
I'll have to take a look at mine and see what will work. I'm assuming the factory valve would mount on the frame under the right fender but I don't know for sure since I've never seen one. John
 

Tractor & Equipment Auctions

New Holland 824 Corn Head (A49251)
New Holland 824...
2005 Ford Ranger Ext. Cab Pickup Truck (A46684)
2005 Ford Ranger...
2010 Ford F-250 Ext. Cab Pickup Truck (A46684)
2010 Ford F-250...
2025 Kivel 48in Forks and Frame Skid Steer Attachment (A49346)
2025 Kivel 48in...
2017 Ford F-150 Crew Cab Pickup Truck (A46684)
2017 Ford F-150...
2013 Chevrolet Cruze LS Sedan (A46684)
2013 Chevrolet...
 
Top