Adding rear remote to my 1533

   / Adding rear remote to my 1533 #11  
Understood, that is why I put "assume".
 
   / Adding rear remote to my 1533 #12  
<font color="blue"> Understood, that is why I put "assume".
</font> I know, no problem. I checked out your pictures. You did get them up, quit a few. /forums/images/graemlins/cool.gif
 
   / Adding rear remote to my 1533
  • Thread Starter
#13  
My stick is mounted on the tractor, just like the one shown in the picture. John
 
   / Adding rear remote to my 1533 #14  
<font color="blue"> My stick is mounted on the tractor </font>
Then, you will almost have to put the remote on the right fender or mount a arm to the ROPS that extends forward over the fender. It is more work, but it makes a much cleaner install if it is on an arm. That is the way I see it anyway.
 
   / Adding rear remote to my 1533
  • Thread Starter
#15  
I'll have to take a look at mine and see what will work. I'm assuming the factory valve would mount on the frame under the right fender but I don't know for sure since I've never seen one. John
 

Tractor & Equipment Auctions

Gravely Pro Stance 52 (A47307)
Gravely Pro Stance...
2019 John Deere 5090E (A47307)
2019 John Deere...
2025 Single Cylinder 40in Grapple Rake Skid Steer Attachment (A46683)
2025 Single...
Lonestar Panels (A49339)
Lonestar Panels...
2018 FORD TRANSIT 250 VAN (A45678)
2018 FORD TRANSIT...
2014 Chevrolet Captiva 1LT SUV (A46684)
2014 Chevrolet...
 
Top