adding tilt to loader

   / adding tilt to loader #1  

farm boy00

Veteran Member
Joined
Jul 17, 2014
Messages
1,297
Location
Howard City, MI
Tractor
John Deere M&MT, Case 1030 comfort king, Sears ST16, Craftsmen 6000, homemade articulation mini-loader
Hey guys, i bought a Allis Chalmers wd45 and I'm buying a trip loader off a tractor identical to it from the same person. It has all hydro for lifting/drop, but i want to add bucket tilt. I got a bunch of cylinders and controllers, but what its the best/cheaper way to run lines along the loader arms?? I know i can dojust regular hydro hoses, but that is a little pricy for the poor man. Any ideas, and no I don't want to get a whole different loader. This one had every thing for just a tilt loader for only $150
 
   / adding tilt to loader #2  
I don't know that you would save much, if anything, by running steel line along the loader arms. You would need to buy extra fittings for each end of the steel lines to connect back to the hose. All those adapters and fittings aren't cheap.
 
   / adding tilt to loader
  • Thread Starter
#3  
I can get black pipe cheap. Here at the closes place to get hydro line for a 3'or so 3/8 with no fancy fitting it cost about $50
 
   / adding tilt to loader
  • Thread Starter
#5  
Wow J_J. Thank u bunches!!! think that will be good enuff for just single cylinder tilt??
 
   / adding tilt to loader #6  
   / adding tilt to loader
  • Thread Starter
#7  
   / adding tilt to loader #8  
Apparently he has a bucket on the loader that only drops when you pull a rope/lever, and he wants a cyl to curl/tilt the bucket.
 

Tractor & Equipment Auctions

Shoreline Boat Trailer (A50860)
Shoreline Boat...
PALLET OF LAMINATE FLOORING (A50460)
PALLET OF LAMINATE...
(INOP) CATERPILLAR 416B BACKHOE (A50459)
(INOP) CATERPILLAR...
Case M4K Rough Terrain Forklift (A48837)
Case M4K Rough...
2017 Dodge Ram 4500 4x4 Crew Cab Reading Service Truck (A48081)
2017 Dodge Ram...
2022 Club Car Tempo Golf Cart (A48082)
2022 Club Car...
 
Top