Additional Pics of my New 3320

[scodemike]

I didn't want to load up the one post with all the pics of the tractor. The one thing I have noticed that it did not have the optional switches for Motion Match and Load Match. Not a big problem since you can step through it with the sequence switch.

 

[jsboening]

Very nice rig! Your going to love the cab this winter. By the way what kind of insulation is that on your shop walls? My brother just built a new pole barn and is looking to insulate the walls. Thanks.

 

[nmu98]

The switches are an 80 dollar option. They install in minutes.

 

[scodemike]

Very nice rig! Your going to love the cab this winter. By the way what kind of insulation is that on your shop walls? My brother just built a new pole barn and is looking to insulate the walls. Thanks.

I already love the cab, I just couldn't take the cold, even with heated gloves, snow boots and Thermal coveralls. Just call me soft I guess.

The insulation is a standard Kraft faced from Home Depot, R19 in the walls and R30 in the ceiling. But, I went to a place that installs insulation and purchased what they call scrim paper in rolls. That is what you see on the walls.

 

[scodemike]

The switches are an 80 dollar option. They install in minutes.

I had read here about the optional switch cost. But, I think once it is set there isn't much reason to change, maybe I am wrong.

 

[nmu98]

I like the auto cruise. I like the resume and the ability to speed or slow the cruise. Other than that. I remove load mach alot, but......

To me, its worth it for the cruise when spraying and seeding. Everyone has different uses, so its hard to say whats good and worth the money....

 

[jsboening]

Thanks for the insulation info. I'll pass it on. By the way welcome to the group.

 

[Nuru]

I already love the cab, I just couldn't take the cold, even with heated gloves, snow boots and Thermal coveralls. Just call me soft I guess.

The insulation is a standard Kraft faced from Home Depot, R19 in the walls and R30 in the ceiling. But, I went to a place that installs insulation and purchased what they call scrim paper in rolls. That is what you see on the walls.

I am thinking of insulating my shed, but i have not done it yet. i also want the same look as you have and thanks for the info. BTW, if I may ask, what brand of foil scrim did you purchase?

 

[scodemike]

I am thinking of insulating my shed, but i have not done it yet. i also want the same look as you have and thanks for the info. BTW, if I may ask, what brand of foil scrim did you purchase?

I don't recall what brand the scrim was, sorry. It isn't foil backed, it is just the white paper with threads running through it for strength.

 

[Nuru]

Ok and thanks.

 

[Spudland_Dave]

The one thing I have noticed that it did not have the optional switches for Motion Match and Load Match. Not a big problem since you can step through it with the sequence switch.

Hmmm....that must be a new thing? Mine was a "Standard/Base" cab tractor and it had the Loadmatch switch...ALL the 3x20 cab tractors I've seen have it....

 

[Ramairfreak98ss]

Mike, nice tractor! I noticed in the picture of your right switch panel, well i guess i didnt realize how many levers mine had until i saw this picture, do you only have the rear PTO? my right most lever is for that, the left most lever is for the 3rd SCV, i dont know what every switch does yet though.. here is a pic http://inlinethumb36.webshots.com/14179/2022482270036233031S600x600Q85.jpg

 

[nmu98]

Hmmm....that must be a new thing? Mine was a "Standard/Base" cab tractor and it had the Loadmatch switch...ALL the 3x20 cab tractors I've seen have it....

The loadmatch switch was phased out in 08, but it comes with the auto cruise switch pack.

 

[EPR]

Great shots. Thank you for sharing.