Adjusting bottom plows

[bsekf]

After reading the "Draft Control" thread I got to thinking that most, including me, don't know how to properly adjust a bottom plow, especially a 3 bottom. Are there any GOOD videos? I've got an AC 3 bottom 14 inch on my 7030 and it pulls hard and doesn't do a good job!

Bill

 

[TractorTech]

Is your plow a 2 point mount or 3 point mount and is it a furrow or on land plow, meaning, does the tractor need to be in the furrow or on land?

 

[mcfarmall]

Red Power magazine had an exhaustive article in the last couple of years that told exactly how to adjust and why.

 

[LouNY]

You've got plenty of tractor to pull 3 14's, but maybe a bit much tire for a 14" bottom.

 

[jeff9366]

Setting up a moldboard plow

I have just finished restoring a ford 101 and have searched and read all I can find about set up. I believe I have got everything figured, but I have one question. Should the top link on the tractor be horizontally centered when set? I am thinking no because if I center the top link then the...

www.tractorbynet.com

VIDEOS:

https://www.youtube.com/results?search_query=adjusting+moldboard+plow