allis chalmers B12 starter wireing

[rustytinman]

i tore apart my tractor to re paint now i do not rember how it went or what went were there is a on/off switch, push button start ,selonid, 2 little lugs 4 small wire ? any help would b great thank you!!!!

 

[Toffy]

I might be able to help you I have a B12. Is yours powered by a 16 hp
Briggs And Stratton?

 

[rustytinman]

its briggs & stranton 12 hp i just need to no where the 2 wires go from the selinod got it 2 cranking that info would be great thank u

 

[Toffy]

I don't mean to make this long and painfull,but are the wires still attached to the soleniod? I will check my manual today for the diagram.

 

[rustytinman]

yes 2 there is 3 posts on the silnoid don't know if it is really a selnoid its a black box with 3 posts but there were only wires on the 1st 2 they r short like they can only go to starter or battrey i would think thanks 4 any info!!!!!!

 

[Toffy]

I tried to send you a message With a wiring diagram attached but i have had no luck. If you send me a private message. I think I can reply with the attached diagram.

 

[rustytinman]

did u get my email any ways yes it is avoltage regulator 1st post has nothing on it 2nd says gen 3rd says bat any info would be great do'nt c how to im u

 

[Toffy]

Well Partner the older I get the more confused i get about these computors. However time is not all lost . My son will post this next week when i give him the schematic. Next time i'm going to saddle up the old mule and deliver it to you in person.

 

[rustytinman]

if u got my email it should go through that. i'm no puter wiz either i have never even used im i just use email 4 everything .but that will be just fine .can u also tell me what fluid they reccomend to put in the gear boxes ? thank for all your help