Guess there's quite a selection of these (Electronic Pest Repeller) on Amazon>>>> Access Denied
Almost time to mow the lawn but first........
- Thread starter Oldpath05
- Start date
- Views: 4179
kthompson
Elite Member
- Joined
- Sep 12, 2008
- Messages
- 3,526
- Location
- South Carolina
- Tractor
- Kubotas B2710, M6800, L6060 cab, Volvo EC excavator, 2 ZTRs and various implements.
Not so much now but years ago when it rained builders took off because they could not work in the rain, even if working inside a house. Nope would go fishing or hunting depending on the time of year.
David_Kb7uns
Veteran Member
Mowed 6 times so far field across the road is almost hay length.
And that is why they say this.......
Linn County “The Grass Seed Capital of the World.”
David
And that is why they say this.......
Linn County “The Grass Seed Capital of the World.”
David
David_Kb7uns
Veteran Member
Garden weeds are the easy things to take care of. Try to keep the deer out is the hard part.
David
My first mowing session Sat afternoon started out ok but ended on a bad note, spent the afternoon diagnosing the problem and near as I can tell somethings broken, I think it was that last big rock I didn't see but heard.
I think Part of the cause is the 5/32 thick blades I put on last August, the original ones was 1/8 but for some reason the thicker blades was cheaper in the short run. I ordered some new spindles, got two for $45.00, that will give me a spare, also ordered the thinner 1/8 blades, think it might be cheaper in staving up blades rather than spindles, got
4 of those for $35.00, all at ebay, should have them before the weeds and rocks need mowing again.
The last picture is what it's supposed to look like, now if JB Weld could weld those ears back on I'd be sold.
I think Part of the cause is the 5/32 thick blades I put on last August, the original ones was 1/8 but for some reason the thicker blades was cheaper in the short run. I ordered some new spindles, got two for $45.00, that will give me a spare, also ordered the thinner 1/8 blades, think it might be cheaper in staving up blades rather than spindles, got
4 of those for $35.00, all at ebay, should have them before the weeds and rocks need mowing again.
The last picture is what it's supposed to look like, now if JB Weld could weld those ears back on I'd be sold.
Spent about 4 hours Sat making a front toe bumper and mounting my ballast box on that was engineered last summer. Now I have something to wrap a chain around so the mower can be tode in the shop for some hammer time, and now when IF I see some rock a rock I can stop and toss them in my ballast box, adds traction to. Box can be unloaded from seat but filling still requires getting of the rider.
