Alternator Problem on M4900

   / Alternator Problem on M4900 #11  
Builder said:
Mine was an external voltage regulator :)
Ah - for the good old days when regulators had relays and contacts and were the size of a loaf of bread !! You could open them up, cure what ailed them and send 'em back in for a few more laps.:)
 
   / Alternator Problem on M4900 #12  
I agree with that statement but IC boards has forced us all to become parts changers without expensive factory sanctioned software to diagnose internal voltage limiting resistance in sealed logic boards.
 
   / Alternator Problem on M4900 #13  
I recommend taking off all of your ground cables on the tractor and cleaning the ends and the places they bolt to completely free of all paint corrosion and whatever else then putting them back on tightly. If I remember right you should have one big one from the starter to the engine and another from the engine block, or frame to the battery. Some models just had one but clean them all whatever you got.
It's almost always the problem I fixed on them when I worked on Kubotas.
 

Tractor & Equipment Auctions

2001 HORSE CREEK MANUFACTURING HEATER (A47001)
2001 HORSE CREEK...
Kubota ZG222 (A47307)
Kubota ZG222 (A47307)
Future Excavator Ripper (A47809)
Future Excavator...
2022 NORSTAR 10 T/A DUMP TRAILER (A47001)
2022 NORSTAR 10...
2021 Liebherr L556 (A48561)
2021 Liebherr L556...
2017 TOYOTA TUNDRA(INOPERABLE) (A47001)
2017 TOYOTA...
 
Top