Cephas71
New member
- Joined
- Mar 11, 2023
- Messages
- 3
- Tractor
- Caterpillar D5K2 LGP 2012
Has anyone out there experienced this
Angle only going one way on my 6-way blade
- Thread starter Cephas71
- Start date
- Views: 1266
jyoutz
Super Member
Sounds like the pivot pin is a little tight. Does it have a bolt you can loosen, and can you get some grease in there to break it loose. Also the pivot pin could be bent.
OP
Cephas71
New member
- Joined
- Mar 11, 2023
- Messages
- 3
- Tractor
- Caterpillar D5K2 LGP 2012
No when I first crank it up the angle works. Once I'm running around a little bit it stops
jyoutz
Super Member
Something is binding the pivot pin when you change angles.
LD1
Epic Contributor
IS it hooked into the remotes on the tractor? Try unplugging them and plugging them back in
It would help if we had some photos and more detail about when the issue happens. Under load? Is the blade hydraulic?
MtnViewRanch
Elite Member, Advertiser
- Joined
- Mar 19, 2005
- Messages
- 10,626
- Tractor
- Mahindra 7520, Mahindra 3215HST, Case 580 extendahoe, Case 310 dozer, Parsons trencher, Cat D6,
Based on his avatar, it is a 6-way dozer blade on his D5 Cat.
If it is, it is different than what we typically think of when we talk about 6-way blades on this forum.
If it is, it is different than what we typically think of when we talk about 6-way blades on this forum.
LD1
Epic Contributor
Could be a 6-way blade on a tonka toy for all we know at this point.Based on his avatar, it is a 6-way dozer blade on his D5 Cat.
The quality of responses is directly proportional to the quantity of info given. And at this point.....it's near zero
MtnViewRanch
Elite Member, Advertiser
- Joined
- Mar 19, 2005
- Messages
- 10,626
- Tractor
- Mahindra 7520, Mahindra 3215HST, Case 580 extendahoe, Case 310 dozer, Parsons trencher, Cat D6,
If you look at the 3 responses that the OP has made, his issue with the transmission and blade are with his D5 Cat. I have no doubt that he has moved on to another forum. I doubt that there will be very many if any responses that help him from TBN.
The OP made 3 posts in 2 threads in 29 minutes last Saturday and has not been back that I can tell.
LD1
Epic Contributor
I suspect you are right.
I didnt see the other thread, and didnt even know he owned a D5 unless I clicked on his profile.
Thats the issue with TBN on a mobile phone (at least mine). Cannot see any profile or signature information unless you specifically click on the members profile.
Thats why its always a good idea to include details in the post itselflol
