Another chipper accident

   / Another chipper accident #21  
Watch this all the way through. Don't blink.

What gets me about this video is that is a low speed hydraulic feed. But once the branch gets past the feeder and the rope its dragging gets to the actual chipper, ZOOM! You're gone. :(
 
   / Another chipper accident #22  
Appreciate videos teaching safety because complacency can come easy...
 
Last edited:
   / Another chipper accident #23  
Ropes and vines are a huge danger. Sent a steel wire winch rope through a chipper once , didn't end well but no injuries. Had a guy trying to stuff a log through the feed rollers with his foot, he should have known better but got away with it .
 
   / Another chipper accident
  • Thread Starter
#24  
Had a guy trying to stuff a log through the feed rollers with his foot, he should have known better but got away with it .
That's the kind of thing I expect of people. The rope is new to me, but good to know. It renders the feed roll useless.
 
   / Another chipper accident #26  
I have a 9" PTO flywheel type chipper (WoodMaxx MX9900). It has a hydraulic motor that runs feed rollers as well as a wrap-around safety bar. My PTO is around 36HP as I remember and this chipper is a scary machine. If something that can kill you doesn't scare you you shouldn't use it. Things like chainsaws, table saws, drill presses, and marriage- things like that.
 
   / Another chipper accident #27  
Wood chippers of all sizes are inherently dangerous and all require some common sense when operating. Problem is, common sense today is getting to be a rare commodity
You have to be mortally afraid of the chipper before you start. Not even 1% room for error.

I'm a hobby chipper around a farm and I've had people trying to, in effect, force me to chip faster by bringing branches to me faster. I made them stop until I caught up. It's too easy to make a mistake.
 
   / Another chipper accident #28  
That's the kind of thing I expect of people. The rope is new to me, but good to know. It renders the feed roll useless.
I can see myself making the same mistake. I would think I am not taking an unnecessary chance without thinking of the ropes.
 
   / Another chipper accident #29  
Update, just posted on YouTube
 
   / Another chipper accident #30  
OSHA used to have a policy of: "It is the policy of the Division to conduct a thorough investigation of the cause of every industrial accident which results in any of the following: (1) a fatal injury to one or more employees; (2) a serious injury or illness; (3) a serious exposure; or (4) the inpatient hospitalization, regardless of duration ."

Then along came:

 

Tractor & Equipment Auctions

Sterling T/A Drill Rig Truck (A55973)
Sterling T/A Drill...
2018 International (A56858)
2018 International...
New/Unused CFG Industrial QK16R Mini Excavator (A57453)
New/Unused CFG...
2011 FORD F350 SERVICE TRUCK (A52707)
2011 FORD F350...
Toyota LPG 7FGCU20 3,400 Lb. Forklift, S/N 86163, Dual Mast, Tilt, 19,871 Hours Indicated, Asset#... (A59076)
Toyota LPG 7FGCU20...
LINCOLN ELECTRIC RANGER 225 GAS WELDER/GENERATOR (A54757)
LINCOLN ELECTRIC...
 
Top