On my TC40D, setting the parking brake has become a big chore. The teeth on the locking mechanism are worn and will not grab. I have to push the brake in far enough for the locking mechanism to sit on top of the brake lever, instead of locking in the teeth. Has anyone solved this problem? If so, did you have to order any new parts?
Another parking brake question
- Thread starter THEBUS
- Start date
- Views: 1106
djradz
Veteran Member
Just curious, how many hours do you have on your 40D?
markie61
Veteran Member
- Joined
- Mar 31, 2001
- Messages
- 1,362
- Location
- Northern Virginia
- Tractor
- 2019 Rural King RK55HC with Loader & Backhoe; 2001 New Holland TC40D with Loader
</font><font color="blue" class="small">( 165 hours. )</font>
Definitely warranty. There was an old thread about the parking brake not holding.
Problem was twofold: toothed piece and brake pedal were on planes at obtuse angle and "male" part was kind of thick - wouldn't set into teeth.
Solution was to grind male piece to a sharper point and bend/twist toothed piece to be in the same plane as pedal motion. Someone posted a picture.
Actually, I think there was also something about the deck flexing too.
Mark
Definitely warranty. There was an old thread about the parking brake not holding.
Problem was twofold: toothed piece and brake pedal were on planes at obtuse angle and "male" part was kind of thick - wouldn't set into teeth.
Solution was to grind male piece to a sharper point and bend/twist toothed piece to be in the same plane as pedal motion. Someone posted a picture.
Actually, I think there was also something about the deck flexing too.
Mark
spencer200
Platinum Member
- Joined
- Feb 4, 2002
- Messages
- 994
There are new replacement parts for this if someone is having a problem it is warrantied. Contact your service manager and tell him to look it up on assist if he does not know about it.
