Anyone add a tool box to their tractor ?

[3gunr]

There are pictures on here somewhere , posted them 4 yrs ago or so, The shelf is very similar to one tractor mike sells on his web site, I made mine to be able to hinge up if i need to fold the rops. It works great but you do have to mount it high to be able to see under it for hooking up the 3 pt,

 

[3gunr]

Go to march 27 2018 tool box for 2538 post #26 You will find the pics

 

[scootr]

Tool box for 2538

If you did no modifications, how did you attach the **** box? Thanks in advance. The step that the box is mounted to has a bunch of approximately inch diameter holes in it for drainage or traction I guess. I drilled holes in the bottom of the **** box and put bolts down through the holes in the...

www.tractorbynet.com

Oh I see. That's interesting.

 

[jyoutz]

- a full on Kennedy tool box. That works. I wanted to keep the low profile so it would not reduce the rear visibility when hooking up implements. You won't be wanting more space, you could carry your tools and your lunch in that box

The box is still lower than the seat back, so it doesn’t affect my visibility. I do like it.

 

[scaredychicken]

I'd peel that stuff off my tractor in about 30 seconds. Anything sticking out past the loader arms becomes a liability and that includes mirrors as well.

i agree, my concern also

I'm still trying to figure out a toolbox location for my TLB ... limited good options for sure, esp since i have some custom fabrication on mine (step, grab bar etc)

 

[Sandroost]

Not so much a tool box, but for lynch pins, bushings etc.

 

[TractorTYMe]

I got this one last fall.