Anyone using a striping kit on a MMM?

   / Anyone using a striping kit on a MMM? #11  
Toolguy,
Thanks for the deck suspension idea. Last summer my friend bought a new B7610 and at that time I was contemplating selling him my 60" deck just because I wanted a suspended deck instead of a ground contact deck. The 54" available with the B Series is a suspended type. Then, at the last minute, I found out that the 54" was not compatible with the bar turf tires I have. Kubota said it was only compatible with the standard turf tires. If I recall, the Turf Special has the 54" deck. I have kicked around the thought of making my 60" a suspended type deck, and now that you have done the work, I am going to make it my next weekend project. Thanks! What are the grey brackets you have the chains hooked to on the tractor?
 
   / Anyone using a striping kit on a MMM? #12  
Toolguy,
Thanks for the deck suspension idea. Last summer my friend bought a new B7610 and at that time I was contemplating selling him my 60" deck just because I wanted a suspended deck instead of a ground contact deck. The 54" available with the B Series is a suspended type. Then, at the last minute, I found out that the 54" was not compatible with the bar turf tires I have. Kubota said it was only compatible with the standard turf tires. If I recall, the Turf Special has the 54" deck. I have kicked around the thought of making my 60" a suspended type deck, and now that you have done the work, I am going to make it my next weekend project. Thanks! What are the grey brackets you have the chains hooked to on the tractor?
 
   / Anyone using a striping kit on a MMM?
  • Thread Starter
#13  
The brackets are just some pieces of 1.5" X 1.5" X 3/16" angle iron. The holes in the frame that they are bolted to were already there. I trimmed off some of the part that the hook goes through. Here is the left side.
 

Attachments

  • 886016-P1010004 (Small).JPG
    886016-P1010004 (Small).JPG
    42.5 KB · Views: 252
   / Anyone using a striping kit on a MMM?
  • Thread Starter
#14  
The brackets are just some pieces of 1.5" X 1.5" X 3/16" angle iron. The holes in the frame that they are bolted to were already there. I trimmed off some of the part that the hook goes through. Here is the left side.
 
   / Anyone using a striping kit on a MMM? #15  
Great! Thanks alot. I am going to try it this weekend.
 
   / Anyone using a striping kit on a MMM? #16  
Great! Thanks alot. I am going to try it this weekend.
 

Tractor & Equipment Auctions

2023 Deere 325G (A60462)
2023 Deere 325G...
2018 VOLVO EC480EL EXCAVATOR (A60429)
2018 VOLVO EC480EL...
1991 International 4900 Box Truck (A55315)
1991 International...
Takeuchi TB016 (A53317)
Takeuchi TB016...
2016 Chevy Silverado Z71 4wd 5.3L V8 (A56438)
2016 Chevy...
500 BBL FRAC TANK (A58214)
500 BBL FRAC TANK...
 
Top