Anyone using a striping kit on a MMM?

robertm · May 15, 2006

Toolguy,
Thanks for the deck suspension idea. Last summer my friend bought a new B7610 and at that time I was contemplating selling him my 60" deck just because I wanted a suspended deck instead of a ground contact deck. The 54" available with the B Series is a suspended type. Then, at the last minute, I found out that the 54" was not compatible with the bar turf tires I have. Kubota said it was only compatible with the standard turf tires. If I recall, the Turf Special has the 54" deck. I have kicked around the thought of making my 60" a suspended type deck, and now that you have done the work, I am going to make it my next weekend project. Thanks! What are the grey brackets you have the chains hooked to on the tractor?

robertm · May 15, 2006

Toolguy,
Thanks for the deck suspension idea. Last summer my friend bought a new B7610 and at that time I was contemplating selling him my 60" deck just because I wanted a suspended deck instead of a ground contact deck. The 54" available with the B Series is a suspended type. Then, at the last minute, I found out that the 54" was not compatible with the bar turf tires I have. Kubota said it was only compatible with the standard turf tires. If I recall, the Turf Special has the 54" deck. I have kicked around the thought of making my 60" a suspended type deck, and now that you have done the work, I am going to make it my next weekend project. Thanks! What are the grey brackets you have the chains hooked to on the tractor?

Toolguy · May 15, 2006

The brackets are just some pieces of 1.5" X 1.5" X 3/16" angle iron. The holes in the frame that they are bolted to were already there. I trimmed off some of the part that the hook goes through. Here is the left side.

Toolguy · May 15, 2006

The brackets are just some pieces of 1.5" X 1.5" X 3/16" angle iron. The holes in the frame that they are bolted to were already there. I trimmed off some of the part that the hook goes through. Here is the left side.