Anyone using the NH grill guard on a TC24d?

   / Anyone using the NH grill guard on a TC24d? #1  

pekabu

Platinum Member
Joined
Jun 7, 2003
Messages
820
Location
NH
Tractor
TC24D
I installed such piece today, and though I only had enough time to install it, it appears there may be some issues with the loader hoses? Anyone else install one of these on the Class 1 boomers?
 
   / Anyone using the NH grill guard on a TC24d? #2  
I had a grill guard installed on my TC24DA when i bought it. I like it and have had no troubles at all.
 
   / Anyone using the NH grill guard on a TC24d? #3  
I just added one to my TC18 yesterday. I don't have a loader so I can't answer your question. I will ask another though. Does anyone use front weights with theirs? The guard will not open all the way. I use suitcase weights not the New Holland ones. It does not interfere with opening the hood though.

Solo
 
   / Anyone using the NH grill guard on a TC24d?
  • Thread Starter
#4  
My guard doesn't open all the way either, just tilts forward some. As long as you can open the hood I would guess your all set.
 
   / Anyone using the NH grill guard on a TC24d? #5  
I figured that was all the farther it opened.

Solo
 
   / Anyone using the NH grill guard on a TC24d? #6  
I don't know if this will help since you have a 24D, as mine is a 24DA. I changed the 45 fitting on the green and yellow lines to a straight one. No more twisted, rubbing together fittings. Much easier to plug-in and unplug plus, it does not seem to run on the grille guard. Hopefully this pic will help.
 

Attachments

  • 656563-TBN1.jpg
    656563-TBN1.jpg
    62.1 KB · Views: 186
   / Anyone using the NH grill guard on a TC24d? #7  
Another from the other side. I also put a couple of black wire ties behind the female couplers to keep the colored bands from sliding up the steel lines and in behind the joystick housing. Hope this helps.
 

Attachments

  • 656565-TBN2.jpg
    656565-TBN2.jpg
    64.1 KB · Views: 163
   / Anyone using the NH grill guard on a TC24d? #8  
I had the dealer install one of the grill guards before I took delivery of my TC24D. Glad I did, it has saved me a couple of times. I've not had any problems with the loader hoses hitting the guard. One thing I notice different about Mega_Me's is he has 45/90 elbows on his hoses, my hoses have no elbows what so ever. I do run my hoses a little bit different then what they were from the dealer though. I run them up over the frame and actually almost under the hood. The way they were originally run the tire would hit them. I actually wore some spots on the cover. I'll try to get some pictures tonight.
 

Tractor & Equipment Auctions

HARDEE SH-360-CO 5' DITCH BANK CUTTER (A52708)
HARDEE SH-360-CO...
2018 Komatsu D155AX-8 Crawler Dozer, S/N 100205, PIN# KMT0D126PJC100205, Turbo Diesel Engine, 13' (A59076)
2018 Komatsu...
2017 Ford F-350 Flatbed Service Truck (A56858)
2017 Ford F-350...
PALLET OF TILE & SUPPLIES (A58374)
PALLET OF TILE &...
2022 Horizon Trailers DH8BP-2 15ft 5 Ton T/A Dump Trailer (A55973)
2022 Horizon...
2020 Freightliner M2 106 Terex Commander C4047 Insulated Digger Derrick Truck (A55973)
2020 Freightliner...
 
Top