Anyone using the NH grill guard on a TC24d?

   / Anyone using the NH grill guard on a TC24d? #1  

pekabu

Platinum Member
Joined
Jun 7, 2003
Messages
820
Location
NH
Tractor
TC24D
I installed such piece today, and though I only had enough time to install it, it appears there may be some issues with the loader hoses? Anyone else install one of these on the Class 1 boomers?
 
   / Anyone using the NH grill guard on a TC24d? #2  
I had a grill guard installed on my TC24DA when i bought it. I like it and have had no troubles at all.
 
   / Anyone using the NH grill guard on a TC24d? #3  
I just added one to my TC18 yesterday. I don't have a loader so I can't answer your question. I will ask another though. Does anyone use front weights with theirs? The guard will not open all the way. I use suitcase weights not the New Holland ones. It does not interfere with opening the hood though.

Solo
 
   / Anyone using the NH grill guard on a TC24d?
  • Thread Starter
#4  
My guard doesn't open all the way either, just tilts forward some. As long as you can open the hood I would guess your all set.
 
   / Anyone using the NH grill guard on a TC24d? #5  
I figured that was all the farther it opened.

Solo
 
   / Anyone using the NH grill guard on a TC24d? #6  
I don't know if this will help since you have a 24D, as mine is a 24DA. I changed the 45 fitting on the green and yellow lines to a straight one. No more twisted, rubbing together fittings. Much easier to plug-in and unplug plus, it does not seem to run on the grille guard. Hopefully this pic will help.
 

Attachments

  • 656563-TBN1.jpg
    656563-TBN1.jpg
    62.1 KB · Views: 183
   / Anyone using the NH grill guard on a TC24d? #7  
Another from the other side. I also put a couple of black wire ties behind the female couplers to keep the colored bands from sliding up the steel lines and in behind the joystick housing. Hope this helps.
 

Attachments

  • 656565-TBN2.jpg
    656565-TBN2.jpg
    64.1 KB · Views: 162
   / Anyone using the NH grill guard on a TC24d? #8  
I had the dealer install one of the grill guards before I took delivery of my TC24D. Glad I did, it has saved me a couple of times. I've not had any problems with the loader hoses hitting the guard. One thing I notice different about Mega_Me's is he has 45/90 elbows on his hoses, my hoses have no elbows what so ever. I do run my hoses a little bit different then what they were from the dealer though. I run them up over the frame and actually almost under the hood. The way they were originally run the tire would hit them. I actually wore some spots on the cover. I'll try to get some pictures tonight.
 

Tractor & Equipment Auctions

2011 INTERNATIONAL PROSTAR TANDEM AXLE SLEEPER TRUCK (A52577)
2011 INTERNATIONAL...
2007 Kubota M5040D 50HP 4WD Front Loader Utility Tractor (A50322)
2007 Kubota M5040D...
2018 Toyota RAV4 Hybrid XLE AWD SUV (A50324)
2018 Toyota RAV4...
2000 International 4700 Truck (RUNS) (TITLE) (A50774)
2000 International...
2017 Kubota U55-4 (A50120)
2017 Kubota U55-4...
2021 Hyundai Elantra SEL Sedan (A50324)
2021 Hyundai...
 
Top