attachments for TS 1610

   / attachments for TS 1610 #1  

lance

New member
Joined
Sep 30, 2003
Messages
3
Location
Wisconsin, rural
Tractor
Iseki 1610
I recently bought a TS1610 along with a 4' bush hog and 5' back blade. However, the back blade hardly fits on the 3 point. Do I need to buy special attachments for this tractor. I was told this tractor could accomidate any four or five foot implement. Help, looking forword to using the bush hog.
 
   / attachments for TS 1610 #2  
What do you mean - the blade doesnt fit the 3pt - are the pins too far apart? If they are too far apart, you should be able to take the pins out and install them on the inside of the 3pt "A frame" on the blade.
 
   / attachments for TS 1610
  • Thread Starter
#3  
Yes, the two side pins are too far apart. I will give that a try, thank you.
 

Tractor & Equipment Auctions

2017 Ford F-150 Ext. Cab Pickup Truck (A50323)
2017 Ford F-150...
(3) 15X8 RIG MATS (A50854)
(3) 15X8 RIG MATS...
Land Honor Quick Attach Vibratory Plate Compactor (A50514)
Land Honor Quick...
SDLG WHEEL LOADER FORKS MAST W/ 48" FORKS (A51242)
SDLG WHEEL LOADER...
Morooka MST 660VD Tracked Dump Truck (A51039)
Morooka MST 660VD...
2023 PJ 49FT Gooseneck Trailer - 35+5, Mega Ramps, 30,000 GVW, Electric Brakes (A51039)
2023 PJ 49FT...
 
Top