B series Where can i find free Shop manual download

   / B series Where can i find free Shop manual download #11  
I have the shop manual in .pdf format.

I'll take it if I may be so forward please. I'll PM an e-mail.


I can't drive 55.

Thank you Sir.
 
   / B series Where can i find free Shop manual download
  • Thread Starter
#12  
Well i guess i will spend the Bucks, The issue was time not bucks, the part in question was a clutch bushing that was incorrect from kubota, I solved the problem by making one.

Thanks for all the Help...
Jeff K
 
   / B series Where can i find free Shop manual download #13  
Well i guess i will spend the Bucks, The issue was time not bucks, the part in question was a clutch bushing that was incorrect from kubota, I solved the problem by making one.

Thanks for all the Help...
Jeff K

Out of curiosity, what was wrong about the clutch bushing? There was only one size for all B-series that used them.

Brian
 
   / B series Where can i find free Shop manual download
  • Thread Starter
#14  
Out of curiosity, what was wrong about the clutch bushing? There was only one size for all B-series that used them.

Brian

Hello Brian, The Bushing was .0050 to small where it fit into the back of the crank shaft.

Jeff K
 
   / B series Where can i find free Shop manual download #15  
It sounds like the bushing had spun and opened up the hole in the crankshaft. I have seen this more than once, usually by much more than .005" though. If there was any bushing left at all. My solution was the same, I would just make one or have one made.

Brian
 
   / B series Where can i find free Shop manual download #16  
It sounds like the bushing had spun and opened up the hole in the crankshaft. I have seen this more than once, usually by much more than .005" though. If there was any bushing left at all. My solution was the same, I would just make one or have one made.

Brian

I'd chuck the bushing in a lathe and knurl the outside, then tap it in.
 
   / B series Where can i find free Shop manual download #17  
Hi dex........Where would I find that free parts manual download for a b7100 gear drive? That would sure come in handy. Thanks..
 
   / B series Where can i find free Shop manual download #18  

Tractor & Equipment Auctions

1453 (A57192)
1453 (A57192)
Unverferth 9250 Auger Wagon (A59814)
Unverferth 9250...
2020 DRAGON ESP 150BBL ALUMINUM (A58214)
2020 DRAGON ESP...
Landoll 876C Soil Finisher (A59814)
Landoll 876C Soil...
2019 Ford F150 XL (A57148)
2019 Ford F150 XL...
Deere 350G LC (A53317)
Deere 350G LC (A53317)
 
Top