B2320 ag tire users!

JOHNTHOMAS · Apr 27, 2012

Verticaltrx said:
The large B-series use the same size, 12.4-16, for both Ag and Industrial tires.

An easy way to get a close measurement to overall width is to take the 'tread' measurement posted in the specs and add the width of one tire. For example, with the B2320 on Ag tires, the tread is (35.5) + tire width (9.5) = 45"

For the Industrial tires, it would be 35.5+12 = 47.5" (this may not be exact, but it will be close)

This formula is also nice to figure the different widths of tractors with multiple rear tread settings. Like the B2320 narrow which can be set from 35.5 to 37.5" overall width, IIRC it can go even wider if you flip the rear hubs.

Or even easier is get a tape measure and measure the distance from the outer edge of each tire, if you have one. Believe it would be more accurate. I'll do that on Monday, already have a note to myself to do it.

JOHNTHOMAS · Apr 29, 2012

Went out today and measured (had my note to self) the distance from the outer edge of the rear Ag tires on my B2320. Looks awful close to a bit over 45" to maybe 46"s depending on how much air is in the tires to make the sides more straight up or a bit rounded.

bilrus61 · Apr 29, 2012

Thank you very much for the measurement and the pics. Picture is worth lots. Thanks again.

pchamlee · Apr 29, 2012

B2320 to be delivered tomorrow! Took me 65 years to buy a new tractor but I finally got to the point that I needed more help than hired kind could give (and I think the tractor won't talk back

)

bilrus61 · Apr 30, 2012

pchamlee said:
B2320 to be delivered tomorrow! Took me 65 years to buy a new tractor but I finally got to the point that I needed more help than hired kind could give (and I think the tractor won't talk back )

Oh boy tell us all about what you ordered and what configureation you got on it as in loader/tires/ stuff like that.:thumbsup:

pchamlee · Apr 30, 2012

Well, "Max" (B2320) arrived with FEL, HST and Land Pride 4' brush hog! Pretty little thing. I got the ag tires, I'm in deep East Tx and it gets a bit boggy here once in a while...not very good for 'turf tyres'

I have to complete the book before I'll take it out for its paces, , , he's replacing an Aliss Chalmers 1981 model and Max has a lot more lights and sirens.

I'll be back!! Cheers.

bp fick · May 1, 2012

pchamlee said:
Well, "Max" (B2320) arrived with FEL, HST and Land Pride 4' brush hog! Pretty little thing. I got the ag tires, I'm in deep East Tx and it gets a bit boggy here once in a while...not very good for 'turf tyres'

I have to complete the book before I'll take it out for its paces, , , he's replacing an Aliss Chalmers 1981 model and Max has a lot more lights and sirens.

I'll be back!! Cheers.

Around here, we demand pictures!!

"Photographic proof, or it didn't happen" is common saying. lol