B2320 with L304 FEL needs quick change adapter on FEL

[TerryMcQ]

I don't know. You don't weld. You need this yesterday. It will likely cost over $800 to buy a pin on ssqa adapter .

I don't see a cheap way to do this.

$474 w/tax for kubota ssqa from LA504 loader with same pin-to-pin and cylinder-to-cylinder measurements. $365 w/tax for tree scoop and one hour of my labor to R&R and grease it.

 

[TerryMcQ]

$474 w/tax for kubota ssqa from LA504 loader with same pin-to-pin and cylinder-to-cylinder measurements. $365 w/tax for tree scoop and one hour of my labor to R&R and grease it.

 

[Avery11]

$474 w/tax for kubota ssqa from LA504 loader with same pin-to-pin and cylinder-to-cylinder measurements. $365 w/tax for tree scoop and one hour of my labor to R&R and grease it.

Forgive the noob but what is R&R in regards to tractor stuff?

 

[Avery11]

Do you have to buy a new FEL bucket once you have the SSQA?

 

[rswyan]

Do you have to buy a new FEL bucket once you have the SSQA?

At a minimum one would have to cut the brackets off of the old bucket and weld on an SSQA attachment plate ... figure around $100 for the plate, minimum.

That's what I did with mine ...cutting the brackets off is no walk in the park, but it can be done.

 

[CDN Farm Boy]

Forgive the noob but what is R&R in regards to tractor stuff?

The same as it is with everything else. Remove & Reinstall

 

[newbury]

$474 w/tax for kubota ssqa from LA504 loader with same pin-to-pin and cylinder-to-cylinder measurements. $365 w/tax for tree scoop and one hour of my labor to R&R and grease it.

Kubota LA54 (FRONT LOADER / B32) Parts Diagrams
Is part #10 the one?
This came from Messicks for the L504.