B2410 voltage regulator
- Thread starter bfarr
- Start date
- Views: 1533
-
- Tags
- kubota b2410 regulator voltage
5030
Rest in Peace
- Joined
- Feb 21, 2003
- Messages
- 28,967
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
Should be 14 volts. Does your tractor have a 'Dynamo' or an alternator? I believe the regulator is built into the alternator on Kubota tractors if I'm not mistaken. The 'Dynamo' will have an external regulator.
number two
Veteran Member
- Joined
- Apr 2, 2007
- Messages
- 1,398
- Location
- Northern Lower Michigan
- Tractor
- Kubota B3030HSDC Kubota L2501HST
Someone here will know.
Info would be in the WSM of any model with the dynamo.
20V AC sounds low,and you should certainly see something like 13.5VDC or higher.
Good Luck!
Info would be in the WSM of any model with the dynamo.
20V AC sounds low,and you should certainly see something like 13.5VDC or higher.
Good Luck!
5030
Rest in Peace
- Joined
- Feb 21, 2003
- Messages
- 28,967
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
The dynamo's are very simple and hardly ever fail. Just a couple magnets and a field winding. Have no idea where the voltage regulator is but it cannot be very expensive to replace.