kubota b2410

Common question it seems, can X fit on my Y…. Kubota really didn’t seem to make this easy for us. Looking at a LA271 loader and would like to know if anyone knows if it would mount and work on out B2410. I know just enough to get myself into trouble with this so all advice welcome. Thanks, Bob

Hello everyone. What should the voltage output be of the voltage regulator on a b2410? I have been having a battery issue and and I’m only getting 12.37 volts with tractor running. Thanks.

I finally bought Pat's Easy Change and am wondering if my B2410 will need a top link extender to work correctly with the Pat's System? If so, can anyone recommend one that will fit and work. Thanks!

Hi guys, an iT eng. In the agro field, we grow grapes and olives and make wine and olive oil, nothing big, about 10000 grape trees and about 1000 olive trees... I致e been messing up with the grinder, welder making different hings for our small Kubota b2410, originally we had an articulated TV...

After using for some light work, just left the B2410 idling a few minutes. Then she let out a puff of black smoke, died, and won't restart. I tried bleeding the fuel lines, new diesel, pumping fuel up through the lines, no oil in water and no water in oil. Any ideas would be appreciated.

Friends of mine have a B2410 and are complaining that brakes seem to be partially applied-like tractor is laboring. Brake lever is in "off" position. tractor does not pull to either side so not a question of one side or other. Any opinions? I asked if all linkage looked normal and response...

My tractor is a Kubota B2410. After full payment on Front end loader LA352 and 3 months of waiting, Kubota could not deliver. Initially, they said it would be 30 days. I got as refund of $3400. Now, still can't find a used one and aftermarket Woods LS84 and Westendorf TA55 are not only much...

Posted in general forums but it probably belongs here. There is a 2005 kubota B2410 HSD-F 4x4 with 615 hours. Comes with; Kubota Backhoe attachment BL4672-A with 12" Bucket Kubota SFB-F24 ROPS (Rollover Protection Structure) Kubota Front end loader attachment LA352 12" Post Hole Digger...

Just bought 2005 Kubota B2410, super little machine,,I have a question about the mower deck, in the up position the front wheels are not clearing the ground,,is this the way its supposed to be, looked under and the stops on the rear of the deck are all the way up against the stops,,any info...

Good morning Out here in Nor Cal there is a 2005 Kubota B2410 HSD-F 4x4 with 615 hours. Comes with; Kubota Backhoe attachment BL4672-A with 12" Bucket Kubota SFB-F24 ROPS (Rollover Protection Structure) Kubota Front end loader attachment LA352 12" Post Hole Digger attachment Box Scraper Blade...

Hello all. I've narrowed my search to a specific tractor I found on Craigslist. I'm looking at a 2005 Kubota 2410 tractor with a LA 352 front end loader, a 60" Land Pride FDR 1660 finish mower. Mower has just under 750 hours, has been stored under a shelter, and looks great. Tires look good...

Howdy, long time away. Good to see old names still hereabouts. Hope all are well. My 2410 is doing well, but I wanted to run some auxiliary lights on the ROPS. They are LED lights and do not draw many amps. I will run a relay and build a harness. My curiosity is any idea where to run the wire...

I have a b1550 and want a loader but none to be found for less than $5000cnd. Tractor is gear 4wd bi speed and 1100 hrs. I've been looking around at replacing it and leaning towards a massey 1705 with loader. Kubota dealer has a used b2410 with 800hrs come with loader and 6ft farm king finishing...

My '04 b2410 started putting out whitish smoke out the exhaust and began running rough. Clean fuel and air filter. Any ideas?

Hey guys, I am looking at a B 2410 with about 1000 hours on it with a belly mower and a la352 loader. Any idea what a good price would be on this? They are asking around $10,500 which seems high but I wanted to see what yall thought. It's in good condition and ready to work. Thanks, Hglouis

Hi all, Over the last few months I haven't used my tractor all that much, but yesterday had a little play with the Bi-speed turn. With the tractor in 4wd I turned slightly whilst holding low pressure against the Bi-speed lever. Sure enough, it engaged, but as I came to turn to the left there...

Kelley B10 , approx 600lbs pto driven. Can i just hook it up to the 3-pt hitch ? or what else would i need ?

I have a 2001 b2410 with a FEL and 50 inch bucket with a bobcat style quick detach bracket. Also 60 inch belly mower and a Sims hard cab with soft doors. I have a extra right door skin. It has front and rear work lights on the cab. Has front and rear wipers and a fan inside. 826 hours on this...

Well, I sure made a mess out of my turnbuckle stabilizer on my 3PH. :mad: I had a large hook on my drawbar to allow me to pull harrows down my driveway. I went to hook up my chipper/shredder and didn't take off the hook. I lifted the 3PH a bit to get it into place and immediately felt...

The 3 pt hitch lever in my tractor has started to get really hard to move backwards and forward, to a point where you have to almost get your elbow in line with the lever to move it. Also, my Diff lock pedal is seized, and despite countless attempts spraying lubricant at the linkages, it just...

I did a search before asking this, but didn't come up with much helpful (granted, my search-foo is probably pretty weak). Anyhoo, I have a B2410 and am looking for a box blade for the rear to do some light dirt work on my Texas gulf coast gumbo mud little plot of land. I looked at a 6' wide...

I have a 10 year old Kubota B2410, about 350 hours or so (I know, I need to get out there more...). This is the first real repair I've had to do aside from maintenance and a cotter pin or two. My loader sometimes sticks in the "up" direction and I have to watch out that the bucket does not end...

I have a little B2410 with a Land Pride 60" finishing mower to run around the land with. The specs on my tractor tell me that the 3 point is capable of lifting about 1200 lbs or so (if my memory serves) 24" from the 3 point center line. The finishing mower weighs in at 577 lbs. Now I...

I can't find my manual for my mower deck. Figuring someone here can give me the answer. How do I pin the mower deck in the up position so that I can use a rake on the three point hitch without removing the mower deck? Thanks

kubota B2410 needs a full tank to run, after I use about 1 gallon of fuel the engine slows and stops. I have loosened the fuel cap, and put on a new filter, same thing. When i change the filter the fuel runs freelly from the tank. What could be the problem? Lloyd

I need to remove a rear wheel for a puncture repair, can anyone offer a suggestion for removing the split cotter on the rear wheel. I have removed the pin through the axle shaft and slackened the cotter nut but access to knock the bolt out is severely restricted within the wheel rim. I've tried...

Hi all, on the back of my B2410 there is the standard hydraulic point for a tipping trailer, but is it possible to fit a return pipe. The reason I'd like this is for using a log splitter. I have a really old log splitter that requires a power feed and return. If it is possible, where is it...

Hi all, I've recently purchased a Kubota B2410 with only 140 hours on the clock. I'm over the moon with the tractor, it's great, but whilst I was trying everything out I've noticed that I cannot get the diff lock to engage. The pedal seems to be stuck, it just will not press down. I've tried...

B-2410 4WD 300 hours MY-2000 turfs 60" belly very good to excellent condition. Say aout a "9" out of 10 What's it worth?

I have a B7610 (which is the same basic tractor as the B2410, B7510, B2400, B2100, B1700, B7500, B7410, B7400, etc), and currently use a 5' back blade (too short, need a 6' to cover my tracks with the turfs set wide) for accumulations under 6", and resort to the Woods SB60 blower for anything...

A friend of mine who owns a B2410 put his ride through the ice. The motor did not go under . It went to the floorboards. Other than changing the fluids can anyone think of some other things that should be done? Kind Regards, RD

I have an oportunity to buy a 2001 Kubota B2410 from a dealer for $8500. It is a 2001 model with 220 or so hours on it, FEL, hydrostatic transmission, and 4wd. It appears to be in good shape. I also have an opportunity to buy a L2800 from an individual for $10500. It is a 2005 or 2006 model...

I have been learning alot by reading the forum. I really appreciate the knowledge that you guys have and would appreciate your opinion on how powerful the Kubota B2410 tractor is. I mainly want it to mow (bush hog)between pine trees in the 3 acres behind my house and harrow food plots for...

My local Kubota dealer took in on trade a 2001 B2410 with FEL. It has 210 hours on it and appears to be in pretty good shape other than a busted head light cover, etc. They want $8500 is this a good price. Also how powerful are these tractors. I mainly want it to mow (bush hog)between pine...

For those that have this or a similar model, what FEL did you get and how do you like it? We are SERIOUSLY looking at a FEL for our B2410 and our options are: 1) New (OEM or other) FEL on older B2410 2) New FEL on new Tractor (would go a little larager) with MMM 3) Buy a used FEL (lots of...

I have a Kubota B2410 compact diesel (4wd, hydro) with front loader rake, blade, snowblower, finsh mower and brush hog for sale. It has approximately 510 hours on it, is in excellent condition and has been garaged from the beginning. The location is southern Ohio. Thank you.

I have a B2410 with 400 hrs. Last year I changed oil and used Kubota Oil. Is there a oil that is less expensive that will work without harming the engine, I was thinking maybe Rotella 15w40? Thanks

I have a B2410 with turf tires. My 3 pt when all the way down drags the ground and it wont go high enough to use several of my implements. I know its the low turf tires but. Has anyone found a better way to get more lift height. My all purpose plow works but I have to lift all the way up to...

I have had this tractor for many years but only recently began thinking about snow chains for it. When looking into this I found that most dealers of snow chains don't list my sizes and those that do sometimes have them listed under "Lawn and Garden Tractor Tires". What are others running on...

When I needed turfs for my B7100, I was fortunate enough to find a set of unused rear turf tires/wheels that were old stock removed from a a new B7300 that was changed over to ags or R4's. I got them for less than 1/2 what it would have cost to buy the news through the Kubota dealer. As...

My B2410 rather suddenly developed a serious transmission issue and I would appreciate any advice offered. More often than not, when you release the HST pedal (hydro controls) traveling in Forward or Reverse, the pedal does not return to "N". At the same time I began to notice a "buck" in the...

What would be a good price on a used b2410 with FEL and 1400 hours? Tires are ag tires.

i know the cat 1 implements w/work but how about the backhoe, undermount grass cutter, grass catcher, snowblower w/powerlift. I'm thinking not but you folks would know better than I. I'm considering a larger tractor. Dont like the thought of having to start over again gathering the implements.

What loader would you recommend Kubota or other brand for a B2410.

-- one owner, dealer maintained since new. 4WD hydro. $5300.

B 2410 HST with front end loader. Just had all filters and fluids changed and now steering is very hard. Only turns a very little unless you are moving foward or backward. I also noticed the power steering and loader take a while to work when you first start up. Read a few post here about...

i have been looking for a while now for a b2400 variant -- i have a blower that i found last year, and am not in the mood to take the backhoe / loader off my 2400 2x a year for the next 50 years -- or so -- :rolleyes: so, i found this b2410 online, and bought her site unseen -- sorta risky, i...

Put this in the Hydraulic section not sure if I should have put it here first I have just purchased a Woods BH6000 from Rosseel's (great price even with shipping) to mount on my B2410. The subframe kit, # 1010613, includes hookup and hoses to PBY at the loader. The B2410 has a rear hydraulic...

I have just purchased a Woods BH6000 from Rosseel's (great price even with shipping) to mount on my B2410. The subframe kit, # 1010613, includes hookup and hoses to PB at the loader. The B2410 has a rear hydraulic block it would seem to be a cleaner installation to purchase the rear...

I've seen here that the B3200 FEL quick attach can be used on the B2920/B2620 (and B2320?). I'm assuming that the B2920 and B2620 are using the LA354 FEL. I have the LA352 FEL on my B7610, and was going to pay to have a QA of the same design made for it, but was wondering if the B3200 QA...

I am adding rear remotes to my newly-purchased B7610. I am going to tee into the tank return connection for the FEL. It connects with a JIC-M8 fitting that threads into the side of the transmission. If this is an NPT fitting, it is likely either a 3/8, or 1/2, but I can't really see the...

What size rear blade is advisable for a B2410. Is a B2410 robust enough to handle blading jobs? Is grading hard on the HST. Thanks

Still out there, the Kubota B2410 continues to serve well with zero issues. Just changed out all fluid and filters, maybe get to plow some snow before long. 3crows

G'day from Australia fellas. Firstly, congratulations on a very useful forum. I've been lurking for a while, but this is my first post here. I wonder if anyone can help me? I currently have a B2410HSD with 4 in 1 loader, 60 inch MMM and various rear end attachments including stick rake, flail...

Hi Folks, Someone is offering a set of new Ag wheels and tire for a B2400. Should these fit my B2410 ok? What would a reasonable price to pay for them be? Ad Reads: "12.4 rear tires and 7x12 front tires"

dealer has one for 6500 with 360 hrs. It has a mmm no fel. I need a new lawn mower & was wondering if this would be better than a ztr. I could always use rototiller to till the garden & stuff. Would I be better off with a zero turn or riding mower? I mow about 5 to 7 acres. Is 6500 a good price...

What would you say a 2002 B2410 with loader and 220 hours should be worth? Paint is good and it has had regular maintenance. Bucket has slighty warn front edge.

Hello, I've got about 150 hours on the tractor and it was bought about 5 years ago, new. The grinding noise is intermitting and usualy appears after releasing the emergency brake. It seems to come from the right rear wheel and has a grinding, crunching sound that sometimes goes away after...

I have a B2410 and am thinking of a backhoe. Do all the hoes that fit my machine have to use the PTO pump setup or is there somebody who makes one that works off the B2410 hydraulics? Thanks

Does anyone have any suggestions on how to raise a MMM deck (RCK60-24B) on a Kubota B2410 to align the brackets? I am about 2" off from vertical alignment. The manual suggests a .15" clearance. I bought a quick hitch for my rotary cutter and would like to pin my MMM to mower hanger brackets...

$11,900 for a 2003 HST model with 375 hours, 60" mower, L352 Loader. In excellent condition. thanks much.

2003 HST model with 375 hours, 60" mower, L352 Loader. Never outside and in excellent condition. thanks much.

I have been searching around for a compact tractor. I was just made this offer by a dealer and have no idea if it's worthwhile (new to the tractor thing). I am hoping some of you veterans will weigh in on this. 2005 Kubota 2410. This is another 24 hp diesel, with 4wd and hydrostatic drive...

I have a screw that has vibrated out that holds the face on my instrument panel. Is there as easy way to remove the plastic cover over the gauges? I haven't spent much time working on a Kubota.

I have a tractor Kubota B2410 and they have an electric problem the starter motor doesn't work. I have checked all the fuses and they are ok, the batery is also ok, I have check the safety switches and they are fine, I think that the key switch is also ok. So to start the engine I have to make...

This is my first post. I've owned a couple redbellies in the past with rear mounted mower. I am looking a 2003 B2410 with 360 hrs. no loader but does have a 60'' mmm. The price is 7200.00 is this a fair price? Any warnings on a B2410? Thanks for any advice

Edit: It's a B2710, not B2410. Doh! I was digging post holes, put PTO in neutral, jumped off with engine running to move something. About 5 seconds later while I was still on the ground the engine stopped. Got back in seat and it won't crank. When I move the key from off to on position I can...

Hello all, I've been faced with a decision to make in regards to tractor selection. First the question and then the details. Would you opt for a new BX2350 w/ FEL and 60" MMM or a 2003 B2410 w/ 60" MMM and a NEW 352 FEL? The primary job of this tractor will be mowing, then minor ground work...

As I continue my long and painful search for a tractor that has all the features I want at a price that I am willing to pay, I've stumbled across one that may fit the bill. The tractor is a 2001 model and has 900.2 hours. It comes with the LA352 FEL and MMM (can't tell the size, maybe someone...

Some here have speculated if the Turf Special suspended deck would be a direct bolt on to B7610/B2410. I just added the RCK60B-75B Turf Special deck to my B2410 and as I suspected it is indeed a direct bolt on without modification. Linkages are all exactly the same as the RCK60-24B and the...

I'm considing selling my 2002 2410 w/220 hours and switching over to a zero turn. It has the 60" mid-mount mower & FEL. Any idea what it might be worth if I sell outright or trade? Also, what's the best place to list it if I move ahead?

My local dealer has a 2 - 3 year old 2410 with 5ft mmm and FEL, and is 2wd with only 97 hours. They are asking $10,800. Is this a fair price and is the 2410 a good machine? I am a newbie here and am looking to buy my first tractor. Any help would be appreciated.

I want to buy a tiller, but I am just not sure about the size. I want a 5' King Kutter, but I may be wiser to choose a 4' King Kutter. Does anyone have any experience with using one or the other? Can my B2410 w/ FEL handle a 5' tiller?

Hi, I have been lurking here for about 6 months and I'm getting pretty close to making a tractor purchase now that my house is nearly done. I've been looking at the B7510/7610 series, but my dad came across a used B2410HSDB on a dealer lot. It is a 2003 model with about 170 hours and a 60" MMM...

Hello everybody. I am seeking advice on what could be my first tractor purchase. I've been researching CUTs and SCUTs for some time now and had sort of determined that a B2410 or B7610 would be a good size tractor for my uses. I had also thought about a BX23 or BX24, but I like the better...

I have been looking at tractors for several months now. It will be used to maintain 7.5 acres, 5 flat clear, 2.5 wooded. Mostly grass cutting,moving dirt, driveway installation and maintainence, etc... I was leaning towards either a b7800 or the L2800. Both of these with loaders are priced at...

Advice needed ASAP. Comments please... I have chance to buy 3-y-o B2410 (210 hours), 4WD,HST with LA352 bucket, Woods BH6500 backhoe, + blade, AG tires, mint condition... he's asking $11K firm. Is this a fair price? I must make fast decision, as seller needs $ for business deal and plans to...

Hi i'm almost certain i will buy a kubota B2410 hydrostatic ,in your opinions will this machine be a good choice for loader work ,bush-hogging,flail mowing,spraying etc ?? most of my work will be on paddocks of less than 6 acres.Thanks for any replies.Oh and loader work will consist of loading...

Hello Members, My wife & I just purchased a home with 6 acres of pasture & mixed hardwood forest land. Gently sloping with gravel roads & no fencing yet. Our main use for the tractor is basic: > Gravel & Dirt movement > Road maintenance > work in our fruit tree orchard and in our blueberry...

Hello, I have the RCK60-24B 60" MMM on my B2410. I've never bothered to pin it up and just remove it when I need 3PH functionality. However, for the duration of having the mower I have "put up" with the mower not lifting in a level even fashion left/right. It has also not lifted high enough...

Hello All Have not posted for a while as my Kubota and I have been just coasting.... But yesterday I took her out bush hoging and after about 1.5 hours, she started working much harder that before. I also noticed that the temp was rising so decided to stop. Since we are at 150 hours...

I should , and will, contact Woods with this question but I figured its the weekend and you guys are here to talk tractor so here it is. First off, does woods make a four point subframe kit for these tractors similar to the one for the BX models? Does the BH6000 sit in nice and close and use the...

The specs on the B2410 and B7610 are exactly the same--are these just the same machine with different numbers? If not, what is the difference between the two? Thanks--Craig

I am working on a deal for kubota B2410 with loader and tiller. Guy says it has 19 hours and in great shape, pictures look good. I have been looking at a new 7610 hydro. Whats the difference in the two? Any trouble to speak of from the 2410? This tractor if it is everything the guy says it is...

I have looked at two different tillers last week for my B2410. The B2410 has 24 hp - 18 PTO hp and a lift capacity of 1,300 lbs at 24" behind LP. My use will be primarily for garden tilling and some lawn preparation in black IA dirt. The two tillers I have looked at available locally: Land...

buykubota-ML-570638-ML- Brand specific post moved to the Kubota Buying/Pricing forum.

I currently have a chance to purchase 2005 Kubota B2410 HSD with Turf Tires and the Front loader ( LA302 FL-1 and Mowing deck RCL60-24B ) for a total of 17,265.00 Is this a good price! Am I being taken and is it a good machine!

Now that I've had my 2410 for a year and a half, I'm considering adding what I was sure I would not- a backhoe. What's the best overall unit considering that I am adding this aftermarket? the Kubota B4672A? Also, since most mount via a subframe which would need to be bolted to the tractor, do...

I know this question may be out of season especially since we have 22" of snow on the ground, but how do you hold the mmm up when using the 3pt hitch? There is a place to slide two pins in to support the front of the mower. I don't see a way to support the back of the mower. When pinned in...

I have been reading the specs on both of these and they seem to have the same engine. Looks like the 7610 is just a spartan 2410. Is this correct? The price difference is less than 2k.

Why is it impossible to find front rims (only) for a B2410 (or any Kubota for that matter)? The dealerships all want to sell a complete set with tires and have told me that they come pre-mounted from Kubota. I have turfs on the rear and run chains but want to switch to ags on the front for the...

I am looking to add tire chains to my front (turf) tires but the steering knuckle is so close to the rim is it almost impossible to run the chains high enough to avoid rub. I am considering buying a set of spacers to move the rims out 1.5 inches for clearance. Anyone tackled this problem before??

Long time reader, first time poster. What a great site! Thanks everyone for all the advice! Can someone possibly tell me what the following is worth? 2002 Kubota B2410 4wd 60" belly mower Bi Speed Turn option 264 Hours (on tractor & mower) brand new LA352 loader w/48" bucket (less than 20...

My local JD dealer, whom I bougt my 425 from, has a 4100 with loader,mmm,front snowblower, front blade, extra set of tires and wheels, and trailer with only 165 hours, for around 17-18k. I have a ford 3000 and have used a friends JD 855 with loader and tiller a few times, which spoiled me. I...

I need your collective expertise. Hooked my B2410 HST to a 4 ft WOODS brushbull rotary cutter this evening. I drove the tractor out of the barn with the cutter about 50 feet to a field of 3 foot grass. Ran smooth. Engaged the PTO at low speed and advanced to rated RPM. After about 25 feet of...

Strange \"Ratcheting Noise\" In Rear of B2410? After seeing my B7500, a buddy bought a B2410. This weekend, he questioned me whether or not my B7500 made a noise like his does. When he backs it up, or drives it forward, there seems to be a ratcheting sound in the rear end of his B2410 HST...

Hi all, Well without berating my lovely wife too much , she attempted to used the Kubota today. She forgot about the glow plugs and when things didn't quite fire up right, she pushed the hydrostatic pedal like a gas pedal . After that she called me at work to tell me it wouldn't start at...

Hi, Anyone have any experience with the B2410 and the Bearcat 70554 Chipper/shredder? Thanks in advance, Fred

During my pre start inspection today, I noticed that there is some oil seeping where the wheel axles exit the transmission case. Looks like there are some seals there. This is happening at the same spot on the other side of the transmission too. Tractor only has 80 hours on it and is only 2...

I've had minor issues with my front turf tires for a while now. Recently the minor issue is that just about every time I go to use the tractor either one or both front tires is very low. I've checked the tires and the side walls have small bulges in them. Almost like weak points allowing the...

It appears to me, an acknowledge novice, that the B7610 and B2410 are virtually identical-except $2000 in price. What am I missing/ Thanks Maury

these 2 tractors appear to have quite a bit in common, but price is quite a bit different. what are the main differences that make up the price differences? thanks John

Couldn't find my old post, but last summer we discussed which small frame tractor (NH JD or Kubota) was the best for various applications. I finally decided on a B2410. Found a 2002 model with 23 hours on ebay that did not sell. I called and eventually bought it, it has proven to be a nice...

Good prices? B2410, HST, Industrials, LA352 FEL, 60"MMM, 290 hours...16,995 BX2200, Turfs, 60"MMM, 585 hours...8,495 Both look to be in good condition. Both machines are at a Green dealer.

Just when you think it is done, it starts up again. I go Kiwis (the fruit). My vineyard is planted and trellised with a pergola system that has wires running horizontally through the field at about 6 feet off the ground. These wires are very, very strong and have very little give. In chosing...

Not in the Operator\'s Manual B2410 Kubota Tractor When the temprature gauge rises above normal and before the red mark I go to the shed and remove the debris from the radiator core with air. Sometimes I follow up with the water hose. Anyway I try to make it a habit to care for the air...

Near the bottom of this web page is my reason for installing a GearMore Top & Tilt feature. There are some links to pictures of the installation.

With the link below are some ramblings about the yellow under the orange along with some pictures. B2410_Kubota If Kubota will provide Operator's Manuals in electronic media format I will be pleased. I like to take a printed page out to the work area and get smudges and all kind of stains...

Hey fellas. I just upgraded from a BX to B2410. I was led to believe that I could lock the MMM up so that it doesn't drag when I'm towing trailers or using stuff off the rear. I like having the weight of it on and really don't want to keep taking it on and off. But I see nothing in the manual...

I purchased a Kubota RC60-24B mid-mower from an auction. It was minus the lift linkage to mount it. I am finding out that Kubota and Kubota parts dealers do not have a 'kit' with all of the appropriate parts. They have to be purchased separately. Does anyone have a source or recommendation to...

Dealer is on vacation. Speed control pedal just started to flop around. No friction and it does not return to neutral. Also, I must wedge the switch closed under the pedal to get the tractor to start. It seems like a spring or such is missing. Any suggestions greatly appreciated.

Just when I thought things had worked themselves out...the local Kubota dealer faxed me today and came way down on the 2410 (24HP)...for 11,600.00. I had decided to move up from the 4010 to the 4110, and the Deere dealer is at $11,000 for the 4110 HST, and $12,500 for the 4115. How's the...

Comparing prices, it looks like these two are about the same so why would you go with the 2410 if you need some added horsepower, weight, and loader and backhoe capacity? Does the 7800 not have postioning control or just the 1/4" adjustment? What about the 3 point hitch adjustments between the...

Hey Folks: I just registered, but I've been "perusing" this site for quite some time. I'm considering trading my BX2200 in on a B2410, or possibly a B7500. The 2200 has an excellent mmm, but I find myself using the loader more than the mower. I would like a loader with more capacity and lifting...

B2410 \"The Orange Mistress\" Hi, I would like to say "thanks" to all those who responded to my previous post on the choice between the BX2200 and the B7500.. I had received a number of quotes and was ready to purchase the B7500..The night before I was going to make the purchase I...

Has anyone with a B2410 experienced a vibration/noise (almost a squeal but more tinny) when the clutch is released? (I'm NOT talking about the normal hydrostatic whine when pressing the forward or reverse pedals.) The dealer says that this happens on new tractors but it should go away. He...

I have a driveway problem. A recent 8 inch snow followed by an tremendous ice storm and a series of heavy trucks delivering christmans stuff pumping up water has left a portion of my driveway a complete mess. (Impassable) I would have it professionally treated and tar & chipped or otherwise...

If one was considering purchasing one of these two tractors with a loader to handle smaller landscape and mowing jobs which one would you buy and why? They are both 24 HP but I have not yet been able to compare the two stat for stat but I think the NH has a more 3pt lift cap. Thanks!

I need help on what plow will fit my B2410 ?? Will a plow from a 9N Ford work on my B2410 if it is a 14"x1 ? Some of the plows that I have looked at appear to be to tall for my B2410 to lift out of the ground. Do I need a specific plow height (to the 3 point hook up) for my B2410 richsei

i have a chance to buy a new (2002) B2410 with 4wd and R4 tires for $11,200. i will see if they will sell it for this price after tax. . .is this a good deal? thank you for quick response as i think time is of the essence and i really don't want to miss out on what i think is a good deal? ? ? Ryan

I ran across a used B2410 HST 4X4 with a 352 FEL, 60" MMM, a 6' blade, 5' bush hog, turf tires and a folding ROPS for $16,500. The tractor only has 27 hours on it. It is a 2000. With that many hours on it it is like new except for a couple of small scratches on the hood. I don't need the...

The rear blade I picked out for my new B2410 (delivered yesterday ) was too big. The tractor could only pick it up off the ground a few inches. So it went back. Now I need to decide what to replace it with. Ill be using this for a variety of task, but the reason I picked a rear blade in the...

Hi all, Thought I would report on the first use of the MMM on my B2410. My newly seeded lawn had finally reached the point where it was really starting to look shaggy and needed "a little off the top". I took the time to grease all the zirks on the mower and pto shaft even though in theory...

OK, tractor experts, I just did the 50 hour service on my 2410--what a mess. Two filters, o-rings, cleaned the strainer and of course I changed the engine oil and filter also and cleaned the air filter etc and greased everything everywhere. I notice in the manual on changing the hydro fluid...

I just have to thank everybody for all the advice and comments. This is my first tractor and I really needed the help. This is probably the best discussion forum on the web. I finally took the plunge a got a Kubota B2410 with a 60" mid mount and the LA352 FEL. I also had the dealer add a...

Well, I finally orderend a B2410 with a 60 '' MMM and FEL with R4 tires with methanol/water in the rear tires from a Frederick MD Kubota dealer. I am paying $16,100 and feel good about the deal. Now I can't wait the 1 - 1 1/2 weeks until I get it. Thank you all for all of you help and guidance...

Hi there, Thought since we had such a nice day here, and I managed to get a little tractor time I'd show a few photos. Didn't get a chance to wash down the Kubota before the photos but it wasn't toooo dirty. This first pic is a side shot of my tractor. Kevin

Pauley Equipment in Escondido, Ca. delivered my B2410 today with FEL, Gearmore 54" scraper with top n tilt. You know what they say, a picture is worth 1,000 words so see attachment. And, no.....I don't plan on trying to move any of those boulders in the background. Thanks to those of you that...

How important is postion control? Dealer says you can do it on the BX just not accurately or repeatably. Need to maintain a small minibike flat track, smooth out ruts, level, etc... Also, I need to remove/move basketball size rocks and smaller a lot. Will the BX do it?? I'm leaning BX but...

I think that I will be ordering a B2410 this week with a 60 in. MMM. I will be finish mowing 4 acres lawn and mowing 6 acres field. Land rather rolling and some areas hilly land. What are the best tires for me, turf or other. I don't want to damage the lawn or put additional ruts in the field...

Just when I thought I made the decision to get the Kubota B2410 with FEL 60" MMM 4wd Hst, My dealer informed me he has two consignments on the lot that he recommends for me. 1) a new holland 1630 hst 4wd with 72" mower and FEL with 127 hours asking $149,00. Tractor appears to be in very good...

Just when I thought I made the decision to get the Kubota B2410 with FEL 60" MMM 4wd Hst, My dealer informed me he has two consignments on the lot that he recommends for me. 1) a new holland 1630 hst 4wd with 72" mower and FEL with 127 hours asking $149,00. Tractor appears to be in very good...

Just got my brand spanking new B2410 with FEL and Befco 5' reart ddischarge mower. And a used box scrapper to boot. I was so excited that my wife said I forgot to kiss her goodbye :) Anyway much thanks for all the advice. I had a landscaper who used to do my mowing but now I am back to...

Who makes the most desirable enclosed trailer for the B2410 with Sun Gaurd, Front End Loader, Back Hoe, Tiller, Belly Mower, Grass Catcher, Trencher, Post Hole Digger, Brush Hog and One Row Cultivator?

I posted a question on the Kubota thread asking about the benifits of a "Top and Tilt" kit to control the box scraper for the Kubota B2410. The dealer can provide a Gearmore TT241 Top&Tilt for the Gearmore box scraper. Does Kubota make their own Top & Tilt kit and if so, are they more...

I'm replacing my old ford with a new Kubota. I have about 10 acres to up keep and do some side work (electrical) 18" deep trenching for conduit. I like the BX because of the size. It looks like it can get into some tight spots which is a plus for me. I also plan on adding a mower so I can...

I am trying to decide between a BX2200 and a B2410 both 4wd both with 60 in MMM (appears B7500 no big advantage over BX2200). I have 17.5 acres, 4 acres groomed lawn, 6 acres fields that I want to cut approx. every 3rd time I cut the lawn, the rest of the property is woods. I also want to get a...

Been on the fence over these 2 models and need to get a machine real soon. Dealer quoted the B7500 Hydro with FEL for $12,500, B2410 with loader for $14,400 (both have rebates). I'm looking at a lifetime investment. Is it worth the extra $2K. I can get a lot of attachments for the difference...

B2410 delivered last monday and I finally had time this sunday to get 3 1/2 hrs seat time. I have to say this machine is totaly, completely, utterly, positivly the greatest thing since sliced bread! It is more than I expected in evey manner. The FEL is great and the Land Pride rake is heavy duty...

I just wanted to thank all of you for the advice I found (mostly by surfing the posts ) for the past few days while tractor shopping. It was a toss up between the B7500 and The B2410. The B2410 got it ! Paid 15K with a rake and LA352 FEL. Should be delivered next Thursday. Im sure I will have a...

Sorry for the duplication. This photo was also posted in the Kubota operating section.

I have been looking for a drink holder to install on my B2410 and could not find a suitable holder. Attended a local Home Show today and noticed a durable drink holder installed on a ExMark ZTR unit. Big enough to hold a large mug or insulated container. This unit has a steel frame and a...

Dealer called at 4:30 today and said they are putting on the FEL and would like to deliver tomorrow afternoon. No problem .looks like a vacation day tomorrow and no sleep tonight. happy new owner of B2410

Hi all, Thanks for you responses on this over the last week or so. I have two more questions if anyone has time. The consensus in the other thread seems to be that the rear wheels (unless you have a special situation like narrow orchard rows, storage space and so on….) should be set as wide as...

5\' or 6\' Rear Blade for B2410? I have a new B2410 HST 4WD and I can get a Woods RB72 or a Woods RB60 for it. Is the 6 foot blade a bit much for the B2410? The RB60 is cheaper. I will use it to maintain my gravel driveway and some grading and digging of dirt. If the wider blade will tax...

Thanks to all of you for your helpful information as I shopped for a tractor. As a novice tractor owner I was lucky to find you all. Thank you. My local dealer (4 miles away) did not give me my best original quote but was willing to match the best offer I got. In addition they brought the...

Here is my need: I have 6 acres to mow. Some is front yard, some is pasture. Part of is it a bit hilly. I want to mow it all regularly with a Mid-Mower. 90% of what the tractor will be used for is mowing. I have a gravel drive to maintain and smooth occaisionally. I want to use a front...

I am building a new house on 5 acres. Eventually I will just be cutting grass and playing around. Now, my plans are to move dirt fill in low areas clean up the area and general landscaping. I can purchase a new B2410 with loader for $16,114 including tax. Or I can purchase a used (55 hours...

I use a Kubota B2410 with a 60" rear blade and a FEL to clear snow off a long (1200') blacktop drive for our development area. Tractor/blade combination works great, however I have been surprised by having autos pull up closely behind without my knowlege. Although I do turn around to look back...

well there IS something wrong with my b2410. that is what my dealer has told me today. i have not been crazy for the last year. now kubota has admitted that there is something wrong with the steering of the b2410 series and is working on a way to fix it. it only took me three weeks without...

I have decided to buy a Kubota! Now which one? Is the 2410 worth 1500 more dollars. You get the position control, 4/2 more HP, and 110 lbs. more weight. Decisions decisions...

b7500 to b2410 for $2940. is this a fair price.

B2410 60\"MMM Mulching Kit? Does Kubota offer a mulching kit for a RCK60-24B mid-mount mower deck installed on a B2410? I've got 6 acres with lots of Oak trees and tons of leaves in the fall. Used my JD445 w/mulching kit last year worked great and enabled me to avoid burning. Since I...

I have located a B2410HST 4x4 with LA352 bucket. This is the model that has the tight turn feature. It has 60 hours and the dealer wants $14,500. I can also get a B7500 elsewhere for $12,500 but I would have to go farther to get it. Is the B2410 worth that much more? What should I offer on...

Hi all, Hoping you can help me with a problem I've encountered. I bought a King Kutter rotary cutter yesterday. After setting it all up and attaching it to the 3PH of my B2410, I found I have very little clearance from the ground at full height. I could adjust the rear height with the top...

Just wondering, Anybody having problems with 2410 steering?

I finally had my B2410 Bi-speed delivered on Thursday. It came in about a week ago with the 60 mid-mower and I was just waiting on the grass-catcher. I only had one chance to try it out before it started raining, again. The grass was little damp and there was clippings from previous mowings so...

My B2410 with Bi-speed turn is in!!! It arrived at the dealer on Thursday and should be delivered in a few days. I got a 60" mid-mount mower, grasscatcher and a 6' adjustable rear blade. I'll also be needing a trailer does anyone have any recommendations for a good one? How about tandem vs...

Hey guys let me get your input on a rotary tiller for my B2410. My dealer is suggesting a Muratori 42" for $1000. He says it is easier to maneuver than the 50" for $1100. He has both in stock. *** I forgot to mention that the 42" tiller can be set for center and left or right offset. *** <P...

Finally took delivery of my new B2410 last night. Looked awfully nice pulling in the driveway. Didn't have too much time to use it but I did manage to use the FEL to fill in a small hole that had been left after the house construction. My only comment is that I sure hope I get better with the...

I've been waiting for 6 weeks (yes, 6, almost 7 in fact) for the B2410 I ordered to show up, and I'm starting to lose hope. Are dealers in your area getting them delivered? Will

I want to purchase a compact tractor and have narrowed it down to the JD 4100 HST and Kubota B2410 HST. John Deere seems to have the name and a great reputation and Kubota seems to have a great satisfied customer base. I know this is a Kubota page but think many of you have deliberated between...

I put a B2410 on order today. I got the Bi-speed option, along with a 60" belly mower & the FEL. I looked real hard at the B2910, but decided I just couldn't justify the bigger tractor. When the Mrs. said we could always trade-up later if our needs changed, I was hooked. I take delivery next...

Well the day has finally arrived. New B2410 HSDB with 60" midmount mower delivered today. Work so busy that all I have had time to do is back it into the garage after the dealer dropped it off. Probably the weekend before I will have any "quality time" with the new addition. Still have snow on...

Hi Again, Seems like a new thread is in order. As promised, I'm reporting back about my impressions of the 2410 and 2710. In the midst of yet another snow storm I visited a third Kubota dealer. In addition to just learning something about this area's dealers I now have 3 price quotes on the...

I went to a local dealer in northern Ohio and got a price for a B2410HSD with a 60" mower for $13,400. I also noticed that in the brochure he gave me, there was a B2410HSDB. My questions are - He did not give me a price for a FEL -- so my questions are 1)How much more would a FEL cost? And 2)...

Thought I would take the liberty of posting to the "Kubota Owning" forum since I am now official an owner. Just purchased a new B2410 which will hopefully be delivered within two weeks. For those who like the details, I got the LA352 FEL, the 60" mid-mount mower, and turf tires. Got the...

Hey Gang, Jeez, it's not getting any easier. Maybe I need to do some deep breathing exercises for a couple of days! In addition to thinking the quotes I got for both the BX and the 7500 are too high, now I'm wondering if I'd regret getting a tractor w/o position control... which means...

I've narrowed down my choices to these two; the B2710 isn't a player. I've got a 1 acre "lawn" around my house, so turf tires & a belly mower are mandatory. Less than a mile away, I've got 1 acre of "garden spot", 3 acres of rough stuff needing a cutter, and 6 acres that could be mowed either...

Here are some photos of my B2410 and my other toy. had to make room in the grange almost had to put the wifes car outside. richsei

Here are some photos of my B2410 and my other toy. had to make room in the grange almost had to put the wifes car outside. richsei

I've been looking at the B2410. I've been getting conflicting information that a 5' rotary cutter is too big for the B2410. I've got an old Servis Chico model that is pretty heavy. Anybody care to give their opinion on this?

I'm thinking of a b2410 or a bx2200 with FEL, boxblade, and midmower. Any ideas on about what I should expect to pay?

Looking at new B2410 with 60" midmount mower. Any idea what a "good" price would be? I live in Canada and there does appear to be somewhat of a discrepancy when I convert posted prices in USD to Canadian dollars. Any Canadians lurking out there with Canadian prices? Any idea what to expect for...

Hi all, I'm doing the compare between New Holland, Kubota, John Deere and Massey Ferguson. Got the "glossies" for all except the Kubota I'm looking at and the dealer was closed (on a Saturday??). Can anyone tell me a few specifics I'm trying to compare on? On the B2410 what is the weight of...

I'm looking at buying a B2410 and had a question about rear blades. The Kubota brochure lists a 4' or 5' rear blade for the B2410, with the note "requires main frame kit". I had planned on buying a Woods or Monroe Tufline rear blade instead of Kubota, but the note has gotten me wondering what...

I am looking for a trailer for my B2410. I will only be hauling the tractor(tires not filled), with the loader, for short distances and maybe only 4 or 5 times per year. I recently visited my local trailer dealer and he pointed me towards a heavy duty single axle trailer that is 12 ft. long...

I am considering a backhoe for my B2410HSTB. Most use would be in and around lawns, and hour here, 1.5 hr there. In total travel time would be almost equal to the use time. My thinking is that the compact 2410 would be: much easier to move and haul, easier on the lawns, more manuverable in...

WODERING WHAT GOING PRICE IS FOR B2410 I HAVE HAD NUMEROUS PRICES THAT RANGE.ALSO WONDERING IF THERE IS A BIG DIFFERENCE IN B7500 TO THE B2410?

I will finally get to post in this section of the board!!! I closed the deal yesterday on a new B2410HSD, loader, and 60" mid-mount mower. The only compromise I had to make was with the wife. She gets a vacation this summer and I take delivery of my new tractor in September. In looking back...

I just bought a new B 2410 and am wondering if there is somwhere I can but the manual for it? The books they give you don't give you all the Info one might want. Also what size loader and hoe goes with the B2410 and how much ? Loader 3000$ and hoe 5000 $ ?????????? thanks

I've just purchased a B2410 and want to mow a rough 4 acre field. After a little hand clearing the main job will be to keep the spirea and goldenrod down. The field is not smooth. If anyone has any advice as to the kind (hog vs finish) and size and brand I'd appreciate hearing from you.

Hello,I'm new to the board, I'm an owner of a B7100 Kubota 1982 model. No doubt the best piece of equipment I have ever owned. My question is on pricing, I have found a 1996 B2400 with a 60" belly mower and 154 hrs. of run time. I would like to purchase this tractor but I'm not sure what is a...

I am looking for comments from anyone who has recently purchased either a B7500 or B2410. How it was equiped, what accessories bought, and how it has performed? I am trying to decide if the B2410 is worth the price difference of $2,000.