B26 Toolbox

   / B26 Toolbox #1  

RichT

Silver Member
Joined
Jun 12, 2003
Messages
231
Location
Fallbrook CA
Tractor
Kubota B26
I was picking up some stuff at local dealer and noticed a B26 on the lot with a toolbox under the passenger floorboard. Took some measurements and decided to build one. Couple things to watch: make sure the mounting bracket didn't interfere with the 3ph arm mount and the floor of the toolbox is above the frame bottom. Some scrap steel plate and $5 in hardware later here it is. Used Kubota grey paint (good stuff).

Useful for stowing the 3ph pins, oil filter wrench, crescent, tire gauge, etc etc...
 

Attachments

  • finalweld.jpg
    finalweld.jpg
    51.3 KB · Views: 337
  • lidopen.jpg
    lidopen.jpg
    42.7 KB · Views: 309
  • final.jpg
    final.jpg
    46 KB · Views: 463
   / B26 Toolbox #2  
Very nice! I like the way its mounted out of the way and looks liek it belongs there. I see you have a tublar pipe part of your fel ? If so why not use that for more toolspace with a capped pipe ?
 

Tractor & Equipment Auctions

New/Unused Pallet of 5 Binder and 10 Chains (A48837)
New/Unused Pallet...
(1) HD 24ft Free Standing Corral Panel (A48837)
(1) HD 24ft Free...
2022 AVANT 860i WHEEL LOADER (A50458)
2022 AVANT 860i...
2005 Superior Trailers VT130 T/A Tanker Trailer (A48081)
2005 Superior...
2005 Trail King TK24LP T/A Tag-Along Dovetail Flatbed Trailer (A49346)
2005 Trail King...
2006 BOBCAT T190 SKID STEER (A50458)
2006 BOBCAT T190...
 
Top