B3030 wheel spacers

[Atlas]

I have acquired a pair of wheel spacers for my Kubota B3030. Although it appears to be a straight forward task to install them I respectfully ask you folks for instructions since no instructions came with them. The kit came with six studs for each side where as the tire as mounted now has two studs and four bolts.

I'm not interested in this easy job turning into a career. Thanks in advance, Atlas

 

[art]

Nothing to special but with the studs you shouldn't need to worry about pulling the threads as much in the hub!

Most compact tractor companies don't even offer the aliagnment studs like on the Kubotas. A few have started to copy them. To have more just makes it that much easier to install wheels and tires!

 

[Piperflyer]

Atlas,
Could you possibly post some pictures after the install. I might be interested in a set for my 3030? Especiall a view looking from the back to front. Good luck getting them on

 

[Atlas]

I'm working seven days a week right now, but, when I get the chance to install the spacers I will take pics, as per your request, and post them.

 

[Ductape]

I know i'm going to sound like a crazy man here, but if you spend a few minutes with the search function, you might even find info on installing the wheel spacers with eek:) PICTURES ! The reason members take the time to photograph procedures is so that other members have them for future reference. Wheel spacers are a very easy install, unless your tires are loaded. If they are...... be careful ! They are three times as heavy as you expect. Simply double nut the studs to install them. Tap the spacer over the studs. Reinstall wheel. Tighten nuts.

http://www.tractorbynet.com/forums/...23930-weekend-project-install-woods-bh-2.html

 

[j_lowder]

I would like to deviate from the original question. Does anyone know if the wheel (hub) dimensions are the same for a B2910 as the B3030? I have been on a search for these for clearance with chains.

If they happen to be the same, can I request the part number and/or source of these spacers.

Thank you.

 

[Ductape]

I would like to deviate from the original question. Does anyone know if the wheel (hub) dimensions are the same for a B2910 as the B3030? I have been on a search for these for clearance with chains.

If they happen to be the same, can I request the part number and/or source of these spacers.

Thank you.

The part number for the rear wheel spacer kit is B8785. The wheel spacers are the same for the B7800, B3200, B2630, and B3030. Unfortunately, my copy of the wholegoods list doesn't have the B2710 or B2910 on it since they are not current tractors......... however i see no reason they wouldn't fit your tractor. List price in '09 was $290.00

 

[PappyW]

Does the Kit come with spacers for both the front and the back or only the back...Thanks in advance

 

[Ductape]

Only the rear...... I'm unaware of a front kit from Kubota, though they are probably available aftermarket.

 

[PappyW]

Does it make any difference to change the tires from one side to the other or is that even possible??

 

[ButteBrute]

I would like to deviate from the original question. Does anyone know if the wheel (hub) dimensions are the same for a B2910 as the B3030? I have been on a search for these for clearance with chains.

If they happen to be the same, can I request the part number and/or source of these spacers.

Thank you.

Sorry to resurrect an older post, but stumbled across it while looking for something else. No, they are different. One is 150mm diameter and the other is 6" diameter. Close, but not the same. Different part numbers from the Kubota dealer, or aftermarket suppliers.

 

[linksvu]

Sorry to resurrect an older post, but stumbled across it while looking for something else. No, they are different. One is 150mm diameter and the other is 6" diameter. Close, but not the same. Different part numbers from the Kubota dealer, or aftermarket suppliers.

Any chance you have the part numbers? I would like to order these for my B3030 but having an issue locating them. Well, truly, I got an order but it was a single spacer, without studs or bolts, at ~198mm wide. It was to be for this tractor but I am not sure and would like to get some confirmation before I order another $190 spacer for the other side.