B3200 BX2660 SIDE BY SIDE...NOT BETTER....DIFFERENT

[JOHNTHOMAS]

Request for comparison.

 

[JOHNTHOMAS]

I think this is the post you were asking about.

 

[JOHNTHOMAS]

Not saying I'm buying but am considering. May need a tractor just for pulling boxblade for light duty, Ferguson overseeder and Kubota tiller. Have F for mowing and BX25 for FEL and BH. Leaning toward a BX1860 and just wanted to look at my pictures from the past.

 

[Johndeere3720]

Not saying I'm buying but am considering. May need a tractor just for pulling boxblade for light duty, Ferguson overseeder and Kubota tiller. Have F for mowing and BX25 for FEL and BH. Leaning toward a BX1860 and just wanted to look at my pictures from the past.

Another bota, I envy you. :laughing: There is a big difference between the B3200 and BX1860. What size implements are they? Would you get a FEL?

 

[JOHNTHOMAS]

Another bota, I envy you. :laughing: There is a big difference between the B3200 and BX1860. What size implements are they? Would you get a FEL?

No FEL, have a BX25 with FEL and BH. My Boxblade is an XB model from my past BX's, the Kubota tiller has been used on my previous BX's and the Ferguson Overseeder rolls so about anything will pull it that has a 3ph. Not saying i'm buying another Bota, just pondering and will have to check tax situation. May need to buy one or pay more taxes.

 

[bp fick]

John, you know I am going to tell you that an 1860 will run those implements without breaking a sweat!!!

The cab is ever so slightly smaller (2") in the 1860 than what you experience with the other BXs, but you just aren't likely to notice or care.

Since you'll mow with your F series, so you won't even need the MMM.

Barlow's had a used one listed, but I think it was decked out with FEL and MMM, but cannot remember for sure.

 

[JOHNTHOMAS]

John, you know I am going to tell you that an 1860 will run those implements without breaking a sweat!!!

The cab is ever so slightly smaller (2") in the 1860 than what you experience with the other BXs, but you just aren't likely to notice or care.

Since you'll mow with your F series, so you won't even need the MMM.

Barlow's had a used one listed, but I think it was decked out with FEL and MMM, but cannot remember for sure.

Thanks BP. I keep hitting this wall of new with 0% interest Barlow discounted price vs used with interest and the new is usually cheaper. I'll check with him if I decide to go further.
Friend from Corbin, Ky called me today with a price of $10500 for a rebuilt wreck B2630 with 3 hours but it will require interest bearing financing for me so the deal isn't so great. Said it had very little damage but rebuilder bought it at an auction, guess insurance pay out.

 

[JOHNTHOMAS]

Bump.

 

[JOHNTHOMAS]

Bump for the B or BX question.

 

[JOHNTHOMAS]

B or BX bump.