B7800 Grease Points

[logan97]

I know the obvious points ( grease nipples) on the FEL and the 3 point are their others?

 

[smstonypoint]

I know the obvious points ( grease nipples) on the FEL and the 3 point are their others?

See the link below.

Kubota : B-Series

 

[logan97]

See the link below.

Kubota : B-Series

Speed control pedal grease fitting where is this one located?

 

[smstonypoint]

Speed control pedal grease fitting where is this one located?

According to this thread, on the "GO" pedal.

http://www.tractorbynet.com/forums/kubota-owning-operating/166728-what-parts-lubricant-kubota-b7800.html

PS. I don't own a B7800 -- I was only aware of the link after consulting it for tips on servicing my RTV 900.

Steve

 

[easygo]

If you sit down next to the tractor on the same side as the HST pedal just rock the pedal by hand and you will see the pivot point below the floor board. The is a grease fitting on that one.

CAUTION!!! Be sure to shot of tractor while doing this. :thumbsup:

 

[logan97]

If you sit down next to the tractor on the same side as the HST pedal just rock the pedal by hand and you will see the pivot point below the floor board. The is a grease fitting on that one.

CAUTION!!! Be sure to shot of tractor while doing this. :thumbsup:

Got It! thanks for everyones help.:thumbsup:

 

[Verticaltrx]

If you sit down next to the tractor on the same side as the HST pedal just rock the pedal by hand and you will see the pivot point below the floor board. The is a grease fitting on that one.

CAUTION!!! Be sure to shot of tractor while doing this. :thumbsup:

There is also a grease fitting on the brake pedal pivot, which also under the deck on the right side. The HST pedal pivot is supposed to be greased every 10hrs.