After several months of proper storage, the hydraulics to my MF backhoe will not lift the stabilzers or move the boom. The hoses do “tighten up” and the implement moves just a small amout when manipulating the levers, but thats it. Backhoe is 1 year old…any suggestions are greatly appreciated.
Backhoe connection to MF
- Thread starter EPFuller
- Start date
- Views: 670
msb1766
Platinum Member
Check the hydraulic fluid level on tractor.
Disconnect and reconnect the hydraulic couplers.
Disconnect and reconnect the hydraulic couplers.
Connected and reconnected several times, indicator window on tractor indicated full fluid levels. Let tractor idle at 15k-20k rpm for 5+ minutes and still no improvement in response. Thank you for your suggestions. Anything else??
Leejohn
Elite Member
See if the couplers are in the spot, could be mixed up.
