I have a MF 2706E with 219hrs on it. It has an issue with the 3pr control. When I first got it the 3pt arms would move up and down pretty much in exact proportion with the control lever, and the arms would start moving when you lifted it off of the stop at 1 and wouldn't reach the top of travel until the control lever reached the top at level 6. Fast forward till now. The arms don't move until the control lever passes three and by the time you get to five the arms are at the top of their travel. If you move the lever passed five, you can hear the pump stall and the FEL loader stops working.
So, my question is where is the adjustment for this? I know the 3pt has a spool valve somewhere, but where should I be looking?
There's a small amount of adjustment for the lever itself, but that's for aligning the lever with the marks on the fender and doesn't do anything for the hydraulics.
Thanks
So, my question is where is the adjustment for this? I know the 3pt has a spool valve somewhere, but where should I be looking?
There's a small amount of adjustment for the lever itself, but that's for aligning the lever with the marks on the fender and doesn't do anything for the hydraulics.
Thanks