Changzhou Townsunny Implements Company Ltd.
Hard to tell from this website... But the tube goes under for sure.
Hard to tell from this website... But the tube goes under for sure.
Backhoe Backhoe subframe and backhoe not attached together?
- Thread starter Calvin
- Start date
- Views: 6607
MJPetersen
Veteran Member
With the tube under the sub can you scoot the BH forward enough so that it will sit down in front of the welded on bar stock? Do the ears then stick down far enough that you can pin under the sub? It would then be locked down. Just an idea.
It is really hard to tell from the pics. but it looks to me like that would work.
Mike
It is really hard to tell from the pics. but it looks to me like that would work.Mike
The BH sits on TOP of the welded bars now. I put some pics up of the new mounting with the BH attaced to the subframe. The ears are in the middle of the frame now and I drilled a hole in each bar and put two big bolts through the hole to attach the 2 pcs together. Looks ok, but some how still does not look like it really should be. Need to do some more research. Thanks.
