GMC Cooker
New member
Im waiting on delivery of a LS XJ2025 with a backhoe, and want to order a mechanical thumb. What brand seems to be the easiest to install, best price etc?
backhoe thumb
- Thread starter GMC Cooker
- Start date
- Views: 4678
TractorGuy
Elite Member
- Joined
- Sep 15, 2013
- Messages
- 4,616
- Location
- N. FL
- Tractor
- John Deere 4310 CUT, Ford New Holland 575E Industrial Backhoe, John Deere F725 Front Mount Mower
I welded a Titan on my backhoe but if I had a new tractor I would look for one that uses the existing pins.
Gary Fowler
Super Star Member
- Joined
- Jun 23, 2008
- Messages
- 11,998
- Location
- Bismarck Arkansas
- Tractor
- 2009 Kubota RTV 900, 2009 Kubota B26 TLB & 2010 model LS P7010
If I were adding a thumb, I would bite the bullet and go with a hydraulic thumb. They are much more versatile than a fixed unit.
rScotty
Super Member
- Joined
- Apr 21, 2001
- Messages
- 9,658
- Location
- Rural mountains - Colorado
- Tractor
- Kubota M59, JD530, JD310SG. Restoring Yanmar YM165D
I would too - go hydraulic I mean. But the reason a hydraulic thumb is important for my work is that I do a lot of landscaping work with rock, trees, and bushes. If I was only digging holes or drainage trenches and putting nothing special into them then there wouldn't be much use for the hydraulic thumb. But I'd still want a mechanical thumb for the sometime use. The shape geometry is sort of important. Get whatever thumb goes with that specific BH.
rScotty
rScotty
jdom84
Gold Member
I looked into this recently. I think I'm going to hold out and fab up a hydro thumb...
I think you are going to have to go with a bolt on model if you don't want to do any kind of modifications. They seem rather chintzy to me because all the pressure is on the 4 bolts and seem like they would move around. A member of this forum put a BRO-TEk on his xj2025 lb1104 bh.
The NH boomer 24/25 is the same as the xj2025 but their BH came ready for thumb install. I think it might be a woods bh instead of the LS?
I think you are going to have to go with a bolt on model if you don't want to do any kind of modifications. They seem rather chintzy to me because all the pressure is on the 4 bolts and seem like they would move around. A member of this forum put a BRO-TEk on his xj2025 lb1104 bh.
The NH boomer 24/25 is the same as the xj2025 but their BH came ready for thumb install. I think it might be a woods bh instead of the LS?
Last edited:
OP
GMC Cooker
New member
Thanks for the info I'm still not sure what I'm going with brand wise. I don't think I can swing the cost of a hydraulic one but I have not looked into how much they are either
downsizingnow48
Elite Member
Does your tractor have a rear remote? Does the Backhoe have a thumb mount? If so your additional cost to get a hydraulic thumb over mechanical would be a cylinder and hoses.
OP
GMC Cooker
New member
At this point the tractor does not have a remote I may have the dealer install one he quoted $400 to do so and I don't know if the Backhoe has a thumb mount or not