Ballast Block

   / Ballast Block #1  

keeney

Veteran Member
Joined
Dec 2, 2001
Messages
1,060
Location
Minnesota
Tractor
JD 4100 HST
Ballast block for use with my 4100 / 410 loader.

10-1/2 sacks of quick-crete.

Two 3/16" flats with 3/4" hole dilled through the end welded to an off-the-shelf cat-1 drawbar.

Some additional rebar thrown into the forms in case it cracks.

Estimated weight = 900 lbs.

I tapered the front so it nestles tight to the tractor - it only protrudes about 10 inches past the lift arms.

- Rick
 

Attachments

  • 770456-IMG_1575_web.jpg
    770456-IMG_1575_web.jpg
    96.4 KB · Views: 1,115
   / Ballast Block
  • Thread Starter
#2  
I chamfered the back corner to further help avoid backing into things.

- Rick
 

Attachments

  • 770458-IMG_1576_web.jpg
    770458-IMG_1576_web.jpg
    92.3 KB · Views: 750

Tractor & Equipment Auctions

2023 PJ 49FT Gooseneck Trailer - 35+5, Mega Ramps, 30,000 GVW, Electric Brakes (A51039)
2023 PJ 49FT...
KOMATSU PC130-8 EXCAVATOR (A50854)
KOMATSU PC130-8...
2000 ADDCO DH1000 Message Board (A49461)
2000 ADDCO DH1000...
2013 Doyle Dry Fertilizer Tender Trailer - Kubota Diesel, 3 Stainless Compartments, Side Discharge (A51039)
2013 Doyle Dry...
HEAVYEQUIPMENT ROLLS OF CONDUIT (A50854)
HEAVYEQUIPMENT...
KNOW BEFORE YOU BID - DO YOUR HOMEWORK AND BE HAPPY WITH YOUR PURCHASE (A51242)
KNOW BEFORE YOU...
 
Top