barnes/haldex question

[rbushmaster]

my 22 gpm barnes 2 stage pump came today from Northern {with no literature] cant even find any online found drawings but thats it

can the pump be reclocked
if i take out the 4 bolts that hold pump together can i turn the mounting flange so it will position the inlet and outlet in a better spot?

and if so is anything going to come flying out? like little springs , check balls etc?
thanks

 

[wdchyd]

I would not untorque this pump under any circumstances......these small pumps have thin clear cellophane gaskets between the sections.....once disturbed they may not go back together with the same results......other pumps can be reclocked relatively easy.....but not Barnes/Haldex....

These pumps being smaller operate under tighter tolerances than their big brothers.....Again, Don't do it.....Buy the fittings to make it work with what you have....:thumbsup:

 

[AKKAMAAN]

Here is some pdf from Haldex....hope the match your pump...

1...

2...