Tandem
Member
I just removed the PowerSafe filter from Pasquali XB40 (BCS 740) and found few pieces of rubber sticking out of the filter holes. Any ideas what these chunks of rubber could be?
BCS PowerSafe Rubber Bits in Filter
- Thread starter Tandem
- Start date
- Views: 1775
Code54
Elite Member
- Joined
- Aug 20, 2005
- Messages
- 4,420
- Location
- Putnam Co. West Virginia
- Tractor
- Kubota MX5100, Kubota BX25D,1957 Farmall Cub Lo-Boy Kubota KX91-3, BCS 853
Looks like some kind of seal - I think I would get ahold of your dealer or BCS and see if their tech guys could help. Good luck.
WesKootenay
Silver Member
- Joined
- Jun 18, 2017
- Messages
- 123
- Location
- Slocan Valley, BC, Canada
- Tractor
- BCS 732. Mahindra 1815 sub compact.
Interesting.
As the oil to be filtered goes in through the outer holes then out the center hole, I am guessing it is gasket sealant that was over applied?
You could cut the filter open and see if there is any debris inside, but I doubt it.
Cheers! :drink:
As the oil to be filtered goes in through the outer holes then out the center hole, I am guessing it is gasket sealant that was over applied?
You could cut the filter open and see if there is any debris inside, but I doubt it.
Cheers! :drink:
Code54
Elite Member
- Joined
- Aug 20, 2005
- Messages
- 4,420
- Location
- Putnam Co. West Virginia
- Tractor
- Kubota MX5100, Kubota BX25D,1957 Farmall Cub Lo-Boy Kubota KX91-3, BCS 853
Glad to hear it was a minor issue and the dealer was able to help. Enjoy that BCS - they are great machines!
