Belarus 825
- Thread starter jmessmer
- Start date
- Views: 2681
-
- Tags
- belarus 825
Hello jmessmer, welcome to TBN! Glad to see you posting. Hope you enjoy being a member of our community. 
yooper1
Veteran Member
Hello and welcome to TBN
You may want to post this question in a different section, maybe:
All Other Brands - TractorByNet.com
the section you are in now is basically just a newbie introduction section and not too many people visit
You may want to post this question in a different section, maybe:
All Other Brands - TractorByNet.com
the section you are in now is basically just a newbie introduction section and not too many people visit
Bison
Platinum Member
I got an belarus 800(same as yours but 2 w dr)for more than 20 yrs.
I dont know what problems you have?, please post them,i can help.
I changed mine to 24V starting by putting a paralel switch in(can be had from a belarus dealer cheaper than anywhere else)Keep the 12 v starter cause it'll spin faster that way and applying 24v wont hurt it as i have used the same starter for over 15 yrs,wheras i burned out a starter a year prior to converting.
If the starter drive over ride clutch goes belly up(happens often),just weld the gear to the housing and it'll last forever.
Hope this helps.
I dont know what problems you have?, please post them,i can help.
I changed mine to 24V starting by putting a paralel switch in(can be had from a belarus dealer cheaper than anywhere else)Keep the 12 v starter cause it'll spin faster that way and applying 24v wont hurt it as i have used the same starter for over 15 yrs,wheras i burned out a starter a year prior to converting.
If the starter drive over ride clutch goes belly up(happens often),just weld the gear to the housing and it'll last forever.
Hope this helps.
Mark @ Everlast
Advertiser
It might help to know what problems you are having? Having a good ground is key.
