Best Oil for older John Deere
- Thread starter Magruder
- Start date
- Views: 2399
thcri
Elite Member
Do you have a picture of that AR??
murph
murph
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
When it comes to antique iron.. keep in mind that -any- oil you can buy right now.. will be superior to what that thing probably ran on new.. and that includes brigs and stratton 30w non-det, and 'jiffy-store' 84 cents a quart type stuff.
On my B I changed the oil about 3 times the first week I had it to get it completely flushed out. i used supertech oil from wallmart.
Soundguy
On my B I changed the oil about 3 times the first week I had it to get it completely flushed out. i used supertech oil from wallmart.
Soundguy
_RaT_
Super Member
- Joined
- Apr 19, 2000
- Messages
- 5,813
- Location
- Peoples Republic of Northern CA.
- Tractor
- Kioti 3510-SE HST
I wonder if Amsoil makes a geriatric oil? /forums/images/graemlins/smile.gif
scott_in_ny
Bronze Member
- Joined
- Dec 1, 2004
- Messages
- 69
- Location
- westchester county n.y.
- Tractor
- kubota BX-22.......couple of sears riding mowers that the neighbors were throwing away at one time or another.
I dont know if this applies to you, but in my old '52 dodge M43 I use a non-detergent oil.
anything that is real old you "may" want to keep using a non-detergent. If you do not there is a possibility that the newer detergent type oils will loosen up some sludge that may become a problem.
just something to think about.
anything that is real old you "may" want to keep using a non-detergent. If you do not there is a possibility that the newer detergent type oils will loosen up some sludge that may become a problem.
just something to think about.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
While that's true.. that a swap from ND to D oil may cause sludge movement, you can take steps to 'help' the process along. Like go with a 50/50 mix of d/nd oil for an oil change.. use a lower hour interval.. use an intermediate filter change. or even do successive oil changes say 10 hours apart.. or a couple weeks apart.. with a filter change inbetween.
Soundguy
Soundguy
