mjncad
Super Member
These bearings came out of a friend of a friend of mine's '57 Chevy hot rod with an aftermarket front suspension kit. The following text is from my friend. Fortunately no one was hurt or worse and the car suffered minimal damage from this cheap junk.
Though difficult to tell in the picture, "China" is etched into the edge of the inner race on these bearings. Only 2900 miles logged on these. You can see how overheated the rollers are. When the cage dissolves between the rollers, not much can be done except replace.
Though difficult to tell in the picture, "China" is etched into the edge of the inner race on these bearings. Only 2900 miles logged on these. You can see how overheated the rollers are. When the cage dissolves between the rollers, not much can be done except replace.