BH6000

[Bota_Orange]

I have a BH6000 and like I have said in my other posts it is awesome. However, there is one thing I noticed yesterday that is very disturbing and I wanted to ask if anyone else has noticed the same thing. I noticed that the seat assembly was rubbing on the hydraulic lines elbow where it connects behind the seat. Had I not seen this I believe that I would have had a big mess on my hands. Has anyone else noticed this? and for those of you who haven't looked take a look so you don't run into a problem later.
Also I tried to post a pic of the stump I removed but I can't seem to figure it out, sorry.

 

[nbennett]

I looked at mine last night and I have at least 2 inches of clearance between the seat assembly and the hydraulic connections. I did notice that the lift arm is very close to the hydraulic line when the backhoe is removed. I will have to watch this to make sure that I don't pinch the line.

 

[CHRIS_PLUCKER]

Just as a question, what do BH 6000 sell for? I have a BX2200 and a loder on the way, is it cheaper to buy a BH 6000 or just trade it in for a BX22 ?

Thanks
ChrisPlucker

 

[Bota_Orange]

I have seen many different prices on this but I think I got a great deal. I paid $3,820 for mine but I have read that most people are paying around $4,800. I think I got such a good deal because I purchased the BH6000 from the dealer I had bought my tractor from and I also recommended a friend to the dealer. Personally if you can find a leftover BX23 that is the way to go but if not I would buy the BH6000 and just add it yourself as opposed to buying a BX24, but I just don't care for all the plastic parts on the BX24. Let us know what you decide.