dstig1
Elite Member
- Joined
- Apr 7, 2010
- Messages
- 4,798
- Location
- W Wisc
- Tractor
- Kubota L5240 HSTC, JD X738 Mower, (Kubota L3130 HST - sold)
Very nice, Terry!
Hey I finally took your ideas for a clamp rack and added one to my welding table. Should have done that a looong time ago! I had a bunch of heavy duty alum angle 2" x 3/8" leftover from a project (or more accurately bought by mistake for a project...) so that worked out perfectly. Drilled a couple holes, then drilled and tapped the legs to match. Now I can actually find my clamps and they aren't falling all over place from the shelf they were lying on in a heap, previously. Some pics:
Hey I finally took your ideas for a clamp rack and added one to my welding table. Should have done that a looong time ago! I had a bunch of heavy duty alum angle 2" x 3/8" leftover from a project (or more accurately bought by mistake for a project...) so that worked out perfectly. Drilled a couple holes, then drilled and tapped the legs to match. Now I can actually find my clamps and they aren't falling all over place from the shelf they were lying on in a heap, previously. Some pics: